NAME Pushmi - Subversion repository replication tool SYNOPSIS pushmi mirror /var/db/my-local-mirror http://master.repository/svn pushmi sync /var/db/my-local-mirror DESCRIPTION Pushmi provides a mechanism for bidirectionally synchronizing Subversion repositories. The main difference between Pushmi and other replication tools is that Pushmi makes the "slave" repositories writable by normal Subversion clients. CONFIGURATION Install and run memcached We use memcached for better atomic locking for mirrors, as the subversion revision properties used for locking in SVK is insufficient in terms of atomicity. You need to start memcached on the "authproxy_port" port specified in pushmi.conf. For exmaple: memcached -p 7123 -dP /var/run/memcached.pid Set up your local repository Create /etc/pushmi.conf and setup username and password. See t/pushmi.conf for example. pushmi mirror /var/db/my-local-mirror http://master.repository/svn Bring the mirror up-to-date. pushmi sync --nowait /var/db/my-local-mirror Configure a cron job to run this command every 5 minutes. Configure your local svn Set up your svn server to serve /var/db/my-local-mirror at "http://slave.repository/svn" For your existing Subversion checkouts, you may now switch to the slave using this command: svn switch --relocate http://master.repository/svn http://slave.repository/svn From there, you can use normal "svn" commands to work with your checkout. Setup auto-verify You can optionally enable auto-verify after every commit by setting revision property "pushmi:auto-verify" on revision 0 for the repository, Which can also be done with: pushmi verify --enable /path/to/repository You will also need to specify the full path of verify-mirror utility in the "verify_mirror" configuration option. When the repository is in inconsistent state, users will be advised to switch back to the master repository when trying to commit. The inconsistent state is denoted by the "pushmi:inconsistent" revision property on revision 0, and can be cleared with: pushmi verify --correct /path/to/repository AUTHENTICATION The above section describes the minimum setup without authentication and authorisation. For svn:// access You can we svn:// access for Pushmi, but there are some limitations for it as of the current implementation. First of all it will have to be using the shared credential when committing to the master. So you will need to make sure the user is allowed to write to the master. And as a side-effect, the commits via the slave will be committed by the shared user on the master. You can however use some post-commit hook or other means to set the "svn:author" revision property afterwards. You will need to make sure "use_shared_commit" is enabled, and if you are using svn+ssh://, make sure the user pushmi runs as has the correct ssh key to commit to the master. For authz_svn-controlled master repository You need to use an external mechanism to replicate the authz file and add a "AuthzSVNAccessFile" directive in the slave's slave "httpd.conf", along with whatever authentication modules and configurations. You will need additional directives in "httpd.conf" using mod_perl2: # replace with your auth settings AuthName "Subversion repository for projectX" AuthType Basic Require valid-user # here are the additional config required for pushmi PerlSetVar PushmiConfig /etc/pushmi.conf PerlAuthenHandler Pushmi::Apache::AuthCache For public-read master repository You can defer the auth* to the master on write. Put the additional config in "httpd.conf": PerlSetVar SVNPath /var/db/my-local-mirror PerlSetVar Pushmi /usr/local/bin/pushmi PerlSetVar PushmiConfig /etc/pushmi.conf AuthName "Subversion repository for projectX" AuthType Basic Require valid-user # for apache 2.0 PerlAuthenHandler Pushmi::Apache::AuthCommit # for apache 2.2 AuthBasicProvider Pushmi::Apache::RelayProvider CONFIG FILE "pushmi" looks for /etc/pushmi.conf or wherever "PUSHMI_CONFIG" in environment points to. Available options are: username The credential to use for mirroring. password The credential to use for mirroring. authproxy_port The port memcached is running on. use_cached_auth If pushmi should use the cached subversion authentication info. use_shared_commit Use the "username" and "password" for committing to master. verify_mirror Path to verify-mirror. Some mirror-related options are configurable in svk, in your ~/.subversion/config's "[svk]" section: ra-pipeline-delta-threshold The size in bytes that pipelined sync should leave the textdelta in a tempfile. Default is 2m. ra-pipeline-buffer The max number of revisions that pipelined sync should keep in memory when it is still busy writing to local repository. LOGGING "pushmi" uses Log::Log4perl as logging facility. Create /etc/pushmi-log.conf. See t/pushmi-log.t as exmaple. See also Log::Log4perl::Config for complete reference. LICENSE Copyright 2006-2007 Best Practical Solutions, LLC. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. SUPPORT To inquire about commercial support, please contact sales@bestpractical.com. AUTHORS Chia-liang Kao