/testing/guestbin/swan-prep --nokeys
Creating empty NSS database
west #
 # System Role deployment on nic will push configurations to our machine
west #
 # into /etc/ipsec.d/
west #
 rm -rf OUTPUT/west/ipsec.d
west #
 mkdir -p OUTPUT/west/ipsec.d
west #
 chmod 777 OUTPUT/west
west #
 mount -o bind,rw OUTPUT/west/ipsec.d /etc/ipsec.d
west #
 # initnss normally happens in the initsystem - but not for namespace testing
west #
 # ../../guestbin/if-namespace.sh ipsec initnss
west #
 ipsec initnss
Initializing NSS database
west #
 /testing/x509/import.sh real/mainca/west.all.p12
ipsec pk12util -w nss-pw -i real/mainca/west.all.p12
pk12util: PKCS12 IMPORT SUCCESSFUL
ipsec certutil -M -n mainca -t CT,,
west #
 # test config for syntax errors
west #
 ipsec addconn --checkconfig --config /etc/ipsec.conf
west #
 # start for test
west #
 ipsec start
Redirecting to: [initsystem]
west #
 ../../guestbin/wait-until-pluto-started
west #
 # test secrets reading for early warning of syntax errors
west #
 ipsec secrets
loading secrets from "/etc/ipsec.secrets"
west #
 ../../guestbin/if-namespace.sh PATH/sbin/sshd -o PidFile=/var/run/pluto/sshd.pid
west #
 # ready for System Role to drop file(s) into /etc/ipsec.d/
west #
 echo "initdone"
initdone
west #
 # New files should have dropped in, and we are ready to restart
west #
 ipsec restart
Redirecting to: [initsystem]
west #
 ../../guestbin/wait-until-pluto-started
west #
 ipsec status | grep 192.1.2
interface eth1 192.1.2.45:UDP/4500 (NAT)
interface eth1 192.1.2.45:UDP/500
"192.1.2.45-to-192.1.2.23": 192.1.2.45...192.1.2.23[%fromcert]; routed-ondemand; my_ip=unset; their_ip=unset;
"192.1.2.45-to-192.1.2.23":   host: oriented; local: 192.1.2.45; remote: 192.1.2.23;
"192.1.2.45-to-192.1.2.23":   mycert=west; my_updown=ipsec _updown;
"192.1.2.45-to-192.1.2.23":   xauth us:none, xauth them:none,  my_username=[any]; their_username=[any]
"192.1.2.45-to-192.1.2.23":   our auth:rsasig(RSASIG+RSASIG_v1_5), their auth:RSASIG+ECDSA+RSASIG_v1_5, our autheap:none, their autheap:none;
"192.1.2.45-to-192.1.2.23":   modecfg info: us:none, them:none, modecfg policy:push, dns:unset, domains:unset, cat:unset;
"192.1.2.45-to-192.1.2.23":   sec_label:unset;
"192.1.2.45-to-192.1.2.23":   CAs: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=Libreswan test CA for mainca, E=testing@libreswan.org'...'%any'
"192.1.2.45-to-192.1.2.23":   ike_life: 28800s; ipsec_life: 28800s; ipsec_max_bytes: 2^63B; ipsec_max_packets: 2^63; replay_window: 128; rekey_margin: 540s; rekey_fuzz: 100%;
"192.1.2.45-to-192.1.2.23":   iptfs: no; fragmentation: yes; packet-size: 0; max-queue-size: 0; drop-time: 0; init-delay: 0; reorder-window: 0;
"192.1.2.45-to-192.1.2.23":   retransmit-interval: 9999ms; retransmit-timeout: 99s; iketcp:no; iketcp-port:4500;
"192.1.2.45-to-192.1.2.23":   initial-contact:no; cisco-unity:no; fake-strongswan:no; send-vendorid:no; send-no-esp-tfc:no;
"192.1.2.45-to-192.1.2.23":   policy: IKEv2+RSASIG+ECDSA+RSASIG_v1_5+ENCRYPT+TUNNEL+PFS+ROUTE+IKE_FRAG_ALLOW+ESN_NO+ESN_YES;
"192.1.2.45-to-192.1.2.23":   v2-auth-hash-policy: SHA2_256+SHA2_384+SHA2_512;
"192.1.2.45-to-192.1.2.23":   conn_prio: 32,32,0; interface: eth1; metric: 0; mtu: unset; sa_prio:auto; sa_tfc:none;
"192.1.2.45-to-192.1.2.23":   nflog-group: unset; mark: unset; vti-iface:unset; vti-routing:no; vti-shared:no; nic-offload:no;
"192.1.2.45-to-192.1.2.23":   our idtype: ID_IPV4_ADDR; our id=192.1.2.45; their idtype: %fromcert; their id=%fromcert
"192.1.2.45-to-192.1.2.23":   liveness: passive; dpddelay:0s; retransmit-timeout:60s
"192.1.2.45-to-192.1.2.23":   nat-traversal: encapsulation:auto; keepalive:20s
"192.1.2.45-to-192.1.2.23":   routing: routed-ondemand;
"192.1.2.45-to-192.1.2.23":   conn serial: $1;
west #
 # connection is ondemand, but we will --up so we can see X.509 auth
west #
 # name is generated by System Role
west #
 ipsec whack --impair suppress_retransmits
west #
 ipsec auto --up 192.1.2.45-to-192.1.2.23
"192.1.2.45-to-192.1.2.23" #1: initiating IKEv2 connection to 192.1.2.23 using UDP
"192.1.2.45-to-192.1.2.23" #1: sent IKE_SA_INIT request to 192.1.2.23:UDP/500
"192.1.2.45-to-192.1.2.23" #1: processed IKE_SA_INIT response from 192.1.2.23:UDP/500 {cipher=AES_GCM_16_256 integ=n/a prf=HMAC_SHA2_512 group=DH19}, initiating IKE_AUTH
"192.1.2.45-to-192.1.2.23" #1: sent IKE_AUTH request to 192.1.2.23:UDP/500
"192.1.2.45-to-192.1.2.23" #1: initiator established IKE SA; authenticated peer certificate 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org' and 3nnn-bit RSASSA-PSS with SHA2_512 digital signature issued by 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=Libreswan test CA for mainca, E=testing@libreswan.org'
"192.1.2.45-to-192.1.2.23" #2: initiator established Child SA using #1; IPsec tunnel [192.1.2.45/32===192.1.2.23/32] {ESP/ESN=>0xESPESP <0xESPESP xfrm=AES_GCM_16_256-NONE DPD=passive}
west #
 ../../guestbin/ping-once.sh --up -I 192.1.2.45 192.1.2.23
up
west #
 # show non-zero IPsec traffic counters
west #
 ipsec whack --trafficstatus
#2: "192.1.2.45-to-192.1.2.23", type=ESP, add_time=1234567890, inBytes=84, outBytes=84, maxBytes=2^63B, id='C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
west #
 echo done
done
west #
 ipsec stop
Redirecting to: [initsystem]
west #
 #rm -f /etc/ipsec.d/*.*
west #
 #umount /etc/ipsec.d
west #
 test -f /var/run/pluto/sshd.pid && kill -9 `cat /var/run/pluto/sshd.pid` >/dev/null
west #
 
