** UTF-8 **
Open I2C Radio v1.0 

			http://sourceforge.jp/projects/openi2cradio/
			http://sourceforge.jp/projects/openi2cradio/wiki/FrontPage
			Nov 07, 2013 K.Ohta <whatisthis.sowhat _at_ gmail.com>
			
			If you can read Japanese , see Readme.ja.txt.

* What is this?

 This is FOSS Radio capablity with BCL(BroadCasting Listening),
controlled by micro-controller.

* Licence

  - Hardware: CC-BY-SA v3.0
  - Software: GPLv2+LE (Basically GPLv2, but SDCC/XC8's libraries is
              excluded from GPLv2)
	      
 I *do not* restrict commercial-use!
 But, I'm very,very,very,(repeat 253times) poor X-) 
 So, please contact and donate to me if you pleasure or using to commercial products!
 If you don't use to commercial product, I also welcome donation from you ;)
 
* Need items
  * MCU, as of PIC18F45K20. But (maybe) easy to port to other MCU, PIC18F
    family or (maybe) AVR, ATMega, but not tested yet.
    http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en026337
    
  * AKC6955 DSP-RADIO-CHIP made by disipur.com (深圳市迪斯普科技有限公司) in china.
    Japanese shop AITENDO sells this chip as DIP MODULE.
     http://www.disipur.com/down/html/?4.html
     http://www.aitendo.com/product/7012

  * LCD character display with HD44780 compatible and 3.3V powered.
    I recommand 16colomns x 2lines display or larger.
 
  * 8.000MHz christal or ceramic-rezonator.
  
  * And other electronics parts and tools ;)
  
  * Microchip's MPLAB X IDE.(Maybe not need?)
     http://www.microchip.com/pagehandler/en-us/family/mplabx/

  * Compiler: 
     - Microchip's XC8 compiler, you can use 32KB program-area PIC18F.
       http://www.microchip.com/pagehandler/en_us/devtools/mplabxc/
     - If you want to build with SDCC(v.3.3.x),
       you should use greater than 48KB program-area PIC18F.
       http://sdcc.sourceforge.net/

* First step

   1. Assemble circuits below of gSCH/ . MW/SW Pre amp seems to be
      not needed if your home is better or has good antenna.
   2. Burn bin/*/*.hex to PIC18F45K20 (or other) MCU via MPLAB X IPE
      or MPLAB X IDE.
      Put MCU(or others) to board.
      And play to GOD,Budda,Allah(or other) ;) and turn on power.
      
      
Have fun!

Ohta.
