/****************************************************************************
**
** Copyright (C) 2019 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of the Qt Creator documentation.
**
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Free Documentation License Usage
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of
** this file. Please review the following information to ensure
** the GNU Free Documentation License version 1.3 requirements
** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
**
****************************************************************************/

// **********************************************************************
// NOTE: the sections are not ordered by their logical order to avoid
// reshuffling the file each time the index order changes (i.e., often).
// Run the fixnavi.pl script to adjust the links to the index order.
// **********************************************************************

/*!
    \contentspage index.html
    \previouspage quick-export-to-qml.html
    \page creator-qml-modules-with-plugins.html
    \nextpage quick-converting-ui-projects.html

    \title Using QML Modules with Plugins

    QML modules may use plugins to expose components defined in C++ to QML
    applications. \QC cannot load the plugins to determine the details of
    the contained components, and therefore, the modules must provide extra type
    information for code completion and the semantic checks to work correctly.

    To create a QML module and make it appear in the \uicontrol Library in
    the Design mode:

    \list 1

        \li Create custom QML controls and place all the \c .qml files in a
           directory dedicated to your module.

        \li Create a \c qmldir file for your module and place it in the module
            directory. For more information, see
            \l {Module Definition qmldir Files}.

        \li Create a \c qmltypes file, preferably using \c qmlplugindump.
            For more information see, \l {Generating qmltypes Files}.

        \li Create a directory named \c designer in your module directory.

        \li Create a \c .metainfo file for your module and place it in the
            \c designer directory. Meta information is needed to display the
            components in the \uicontrol {QML Types} tab in the \uicontrol
            Library. Use a metainfo file delivered with Qt, such as
            \c qtquickcontrols2.metainfo, as an example.

        \li Import your module into a project using \c QML_IMPORT_PATH in the
            .pro file: \c {QML_IMPORT_PATH += path/to/module}.
            For more information, see \l {Importing QML Modules}.

        \li Make sure that the QML emulation layer used in the Design mode is built with
            the same Qt version as your QML modules. For more information, see
            \l {Running QML Modules in Design Mode}. You can also try
            skipping this step and take it later, if necessary.

    \endlist

    Your module should now appear in the \uicontrol Imports tab in the
    \uicontrol Library in the Design mode. Your components should appear in the
    \uicontrol {QML Types} tab if a valid \c .metainfo file is in place.

    \section1 Registering QML Types

    When you write a QML module or use QML from a C++ application, you typically
    register new types with the qmlRegisterType() function or expose some
    class instances with \l{QQmlContext::setContextProperty()}. The \QC C++
    code model now scans for these calls and
    tells the QML code model about them. This means that properties are
    displayed during code completion and the JavaScript code checker does not
    complain about unknown types. However, this works only when the source code
    is available, and therefore, you must explicitly generate type information
    for QML modules with plugins before distributing them.

    Classes registered with \c qmlRegisterType() can be used as backend objects
    in the Design mode. For more information, see \l {Adding Connections}.

    \section1 Generating qmltypes Files

    Ideally, QML modules have a \c{plugins.qmltypes} file in the same directory
    as the \c qmldir file. The \c qmltypes file contains a description of the
    types exported by the module's plugins and is loaded by \QC when the
    module is imported.

    For Qt 4.8 and later, one or more \c qmltypes files can be listed in the
    \c qmldir file under the \c typeinfo header. These files will be read in
    addition to \c{plugins.qmltypes}. For more information, see
    \l{Writing a qmltypes File}.

    You can create and edit \c qmltypes files manually, but you are recommended
    to use the \c qmlplugindump tool shipped with Qt 4.8 and later to generate
    them automatically.

    Once you have obtained \c qmlplugindump for the Qt version the QML module's
    plugins were compiled with, run the following command to load My.Module
    version 1.0 from \c{/import/path/my/module} including all its plugins and
    output a description of the plugins' types to
    \c{/import/path/my/module/plugins.qmltypes}:

    \code
    qmlplugindump -nonrelocatable My.Module 1.0 /import/path > /import/path/my/module/plugins.qmltypes
    \endcode

    You can safely ignore the debug output.

    For Qt 4.7.x, you can compile a version of the tool called \c qmldump from
    the sources in \c{<QtCreator>/share/qtcreator/qml/qmldump} if the Qt version
    contains private headers.

    \section2 Dumping Plugins Automatically

    If a module with plugins lacks the \c qmltypes file, \QC tries to generate
    a temporary file itself by running the \c qmldump program in the background.
    However, this automatic dumping is a fallback mechanism with many points of
    failure and you cannot rely upon it.

    \section1 Importing QML Modules

    By default, \QC will look in the QML import path of Qt for QML modules.
    If your applications adds additional import paths that \QC should use,
    then you can specify those using \c{QML_IMPORT_PATH} in the \c{.pro} file of your
    application.

    If you use CMake, add the following command to the CMakeLists.txt file to
    set the QML import path:

    \code
    set(QML_IMPORT_PATH ${CMAKE_SOURCE_DIR}/qml ${CMAKE_BINARY_DIR}/imports CACHE STRING "" FORCE)
    \endcode

    The import path affects all the targets built by the CMake project.

    \section1 Running QML Modules in Design Mode

    A QML emulation layer (also called QML Puppet) is used in the Design mode to
    render and preview images and to collect data. To be able to render custom types
    correctly from QML modules, the emulation layer must be built with the same
    Qt version as the QML modules.

    By default, a fallback emulation layer is provided by \QC and built with the same
    Qt version as \QC. Therefore, your QML modules will mostly not work out of
    the box.

    To use an emulation layer that is built with the Qt
    configured in the build and run kit for the project, select \uicontrol Tools >
    \uicontrol Options > \uicontrol {Qt Quick} > \uicontrol {\QMLD} >
    \uicontrol {Use QML emulation layer which is built by the selected Qt} radio button.
    \QC builds the emulation layer when you select the Design mode.

    A plugin should behave differently depending on whether it is run by the
    emulation layer or an application. For example, animations should not be run
    in the Design mode. You can use the value of the QML_PUPPET_MODE
    environment variable to check whether the plugin is currently being run
    by an application or edited in the Design mode.

    If you want to use a different module in the Design mode than in your actual
    application for example to mockup C++ items, then you can use \c{QML_DESIGNER_IMPORT_PATH}
    in the \c{.pro} file (for qmake projects), or declare and set the property
    qmlDesignerImportPaths in your product (for Qbs projects).
    Modules in the import paths defined in \c{QML_DESIGNER_IMPORT_PATH} will be
    used only in the Design mode.
    For an example, see \l {Qt Quick Controls - Contact List}.

*/
