BIRD Programmer's Documentation: Protocols

Next Previous Contents

## 5. Protocols

## 5.1 The Babel protocol

The Babel is a loop-avoiding distance-vector routing protocol that is robust and efficient both in ordinary wired networks and in wireless mesh networks.

The Babel protocol keeps state for each neighbour in a babel_neighbor struct, tracking received Hello and I Heard You (IHU) messages. A babel_interface struct keeps hello and update times for each interface, and a separate hello seqno is maintained for each interface.

For each prefix, Babel keeps track of both the possible routes (with next hop and router IDs), as well as the feasibility distance for each prefix and router id. The prefix itself is tracked in a babel_entry struct, while the possible routes for the prefix are tracked as babel_route entries and the feasibility distance is maintained through babel_source structures.

The main route selection is done in babel_select_route(). This is called when an entry is updated by receiving updates from the network or when modified by internal timers. The function selects from feasible and reachable routes the one with the lowest metric to be announced to the core.

Supported standards: RFC 8966 - The Babel Routing Protocol RFC 8967 - MAC Authentication for Babel RFC 9079 - Source Specific Routing for Babel RFC 9229 - IPv4 Routes with IPv6 Next Hop for Babel

### Function

void babel_announce_rte (struct babel_proto * p, struct babel_entry * e) -- announce selected route to the core

### Arguments

struct babel_proto * p

  Babel protocol instance

struct babel_entry * e

  Babel route entry to announce

### Description

This function announces a Babel entry to the core if it has a selected incoming path, and retracts it otherwise. If there is no selected route but the entry is valid and ours, the unreachable route is announced instead.

### Function

void babel_select_route (struct babel_proto * p, struct babel_entry * e, struct babel_route * mod) -- select best route for given route entry

### Arguments

struct babel_proto * p

  Babel protocol instance

struct babel_entry * e

  Babel entry to select the best route for

struct babel_route * mod

  Babel route that was modified or NULL if unspecified

### Description

Select the best reachable and feasible route for a given prefix among the routes received from peers, and propagate it to the nest. This just selects the reachable and feasible route with the lowest metric, but keeps selected the old one in case of tie.

If no feasible route is available for a prefix that previously had a route selected, a seqno request is sent to try to get a valid route. If the entry is valid and not owned by us, the unreachable route is announced to the nest (to blackhole packets going to it, as per section 2.8). It is later removed by babel_expire_routes(). Otherwise, the route is just removed from the nest.

Argument mod is used to optimize best route calculation. When specified, the function can assume that only the mod route was modified to avoid full best route selection and announcement when non-best route was modified in minor way. The caller is advised to not call babel_select_route() when no change is done (e.g. periodic route updates) to avoid unnecessary announcements of the same best route. The caller is not required to call the function in case of a retraction of a non-best route.

Note that the function does not active triggered updates. That is done by babel_rt_notify() when the change is propagated back to Babel.

### Function

void babel_send_update_ (struct babel_iface * ifa, btime changed, struct fib * rtable) -- send route table updates

### Arguments

struct babel_iface * ifa

  Interface to transmit on

btime changed

  Only send entries changed since this time

struct fib * rtable

  -- undescribed --

### Description

This function produces update TLVs for all entries changed since the time indicated by the changed parameter and queues them for transmission on the selected interface. During the process, the feasibility distance for each transmitted entry is updated.

### Function

void babel_handle_update (union babel_msg * m, struct babel_iface * ifa) -- handle incoming route updates

### Arguments

union babel_msg * m

  Incoming update TLV

struct babel_iface * ifa

  Interface the update was received on

### Description

This function is called as a handler for update TLVs and handles the updating and maintenance of route entries in Babel's internal routing cache. The handling follows the actions described in the Babel RFC, and at the end of each update handling, babel_select_route() is called on the affected entry to optionally update the selected routes and propagate them to the core.

### Function

void babel_auth_reset_index (struct babel_iface * ifa) -- Reset authentication index on interface

### Arguments

struct babel_iface * ifa

  Interface to reset

### Description

This function resets the authentication index and packet counter for an interface, and should be called on interface configuration, or when the packet counter overflows.

### Function

void babel_iface_timer (timer * t) -- Babel interface timer handler

### Arguments

timer * t

  Timer

### Description

This function is called by the per-interface timer and triggers sending of periodic Hello's and both triggered and periodic updates. Periodic Hello's and updates are simply handled by setting the next_{hello,regular} variables on the interface, and triggering an update (and resetting the variable) whenever 'now' exceeds that value.

For triggered updates, babel_trigger_iface_update() will set the want_triggered field on the interface to a timestamp value. If this is set (and the next_triggered time has passed; this is a rate limiting mechanism), babel_send_update() will be called with this timestamp as the second parameter. This causes updates to be send consisting of only the routes that have changed since the time saved in want_triggered.

Mostly when an update is triggered, the route being modified will be set to the value of 'now' at the time of the trigger; the >= comparison for selecting which routes to send in the update will make sure this is included.

### Function

void babel_timer (timer * t) -- global timer hook

### Arguments

timer * t

  Timer

### Description

This function is called by the global protocol instance timer and handles expiration of routes and neighbours as well as pruning of the seqno request cache.

### Function

uint babel_write_queue (struct babel_iface * ifa, list * queue) -- Write a TLV queue to a transmission buffer

### Arguments

struct babel_iface * ifa

  Interface holding the transmission buffer

list * queue

  TLV queue to write (containing internal-format TLVs)

### Description

This function writes a packet to the interface transmission buffer with as many TLVs from the queue as will fit in the buffer. It returns the number of bytes written (NOT counting the packet header). The function is called by babel_send_queue() and babel_send_unicast() to construct packets for transmission, and uses per-TLV helper functions to convert the internal-format TLVs to their wire representations.

The TLVs in the queue are freed after they are written to the buffer.

### Function

void babel_send_unicast (union babel_msg * msg, struct babel_iface * ifa, ip_addr dest) -- send a single TLV via unicast to a destination

### Arguments

union babel_msg * msg

  TLV to send

struct babel_iface * ifa

  Interface to send via

ip_addr dest

  Destination of the TLV

### Description

This function is used to send a single TLV via unicast to a designated receiver. This is used for replying to certain incoming requests, and for sending unicast requests to refresh routes before they expire.

### Function

void babel_enqueue (union babel_msg * msg, struct babel_iface * ifa) -- enqueue a TLV for transmission on an interface

### Arguments

union babel_msg * msg

  TLV to enqueue (in internal TLV format)

struct babel_iface * ifa

  Interface to enqueue to

### Description

This function is called to enqueue a TLV for subsequent transmission on an interface. The transmission event is triggered whenever a TLV is enqueued; this ensures that TLVs will be transmitted in a timely manner, but that TLVs which are enqueued in rapid succession can be transmitted together in one packet.

### Function

void babel_process_packet (struct babel_iface * ifa, struct babel_pkt_header * pkt, int len, ip_addr saddr, u16 sport, ip_addr daddr, u16 dport) -- process incoming data packet

### Arguments

struct babel_iface * ifa

  Interface packet was received on

struct babel_pkt_header * pkt

  Pointer to the packet data

int len

  Length of received packet

ip_addr saddr

  Address of packet sender

u16 sport

  Packet source port

ip_addr daddr

  Destination address of packet

u16 dport

  Packet destination port

### Description

This function is the main processing hook of incoming Babel packets. It checks that the packet header is well-formed, then processes the TLVs contained in the packet. This is done in two passes: First all TLVs are parsed into the internal TLV format. If a TLV parser fails, processing of the rest of the packet is aborted.

After the parsing step, the TLV handlers are called for each parsed TLV in order.

### Function

int babel_auth_check (struct babel_iface * ifa, ip_addr saddr, u16 sport, ip_addr daddr, u16 dport, struct babel_pkt_header * pkt, byte * trailer, uint trailer_len) -- Check authentication for a packet

### Arguments

struct babel_iface * ifa

  Interface holding the transmission buffer

ip_addr saddr

  Source address the packet was received from

u16 sport

  Source port the packet was received from

ip_addr daddr

  Destination address the packet was sent to

u16 dport

  Destination port the packet was sent to

struct babel_pkt_header * pkt

  Pointer to start of the packet data

byte * trailer

  Pointer to the packet trailer

uint trailer_len

  Length of the packet trailer

### Description

This function performs any necessary authentication checks on a packet and returns 0 if the packet should be accepted (either because it has been successfully authenticated or because authentication is disabled or configured in permissive mode), or 1 if the packet should be dropped without further processing.

### Function

int babel_auth_add_tlvs (struct babel_iface * ifa, struct babel_tlv * hdr, uint max_len) -- Add authentication-related TLVs to a packet

### Arguments

struct babel_iface * ifa

  Interface holding the transmission buffer

struct babel_tlv * hdr

  -- undescribed --

uint max_len

  Maximum length available for adding new TLVs

### Description

This function adds any new TLVs required by the authentication mode to a packet before it is shipped out. For MAC authentication, this is the packet counter TLV that must be included in every packet.

### Function

int babel_auth_sign (struct babel_iface * ifa, ip_addr dest) -- Sign an outgoing packet before transmission

### Arguments

struct babel_iface * ifa

  Interface holding the transmission buffer

ip_addr dest

  Destination address of the packet

### Description

This function adds authentication signature(s) to the packet trailer for each of the configured authentication keys on the interface.

### Function

void babel_auth_set_tx_overhead (struct babel_iface * ifa) -- Set interface TX overhead for authentication

### Arguments

struct babel_iface * ifa

  Interface to configure

### Description

This function sets the TX overhead for an interface based on its authentication configuration.

## 5.2 Bidirectional Forwarding Detection

The BFD protocol is implemented in three files: `bfd.c` containing the protocol logic and the protocol glue with BIRD core, `packets.c` handling BFD packet processing, RX, TX and protocol sockets. `io.c` then contains generic code for the event loop, threads and event sources (sockets, microsecond timers). This generic code will be merged to the main BIRD I/O code in the future.

The BFD implementation uses a separate thread with an internal event loop for handling the protocol logic, which requires high-res and low-latency timing, so it is not affected by the rest of BIRD, which has several low-granularity hooks in the main loop, uses second-based timers and cannot offer good latency. The core of BFD protocol (the code related to BFD sessions, interfaces and packets) runs in the BFD thread, while the rest (the code related to BFD requests, BFD neighbors and the protocol glue) runs in the main thread.

BFD sessions are represented by structure bfd_session that contains a state related to the session and two timers (TX timer for periodic packets and hold timer for session timeout). These sessions are allocated from session_slab and are accessible by two hash tables, session_hash_id (by session ID) and session_hash_ip (by IP addresses of neighbors and associated interfaces). Slab and both hashes are in the main protocol structure bfd_proto. The protocol logic related to BFD sessions is implemented in internal functions bfd_session_*(), which are expected to be called from the context of BFD thread, and external functions bfd_add_session(), bfd_remove_session() and bfd_reconfigure_session(), which form an interface to the BFD core for the rest and are expected to be called from the context of main thread.

Each BFD session has an associated BFD interface, represented by structure bfd_iface. A BFD interface contains a socket used for TX (the one for RX is shared in bfd_proto), an interface configuration and reference counter. Compared to interface structures of other protocols, these structures are not created and removed based on interface notification events, but according to the needs of BFD sessions. When a new session is created, it requests a proper BFD interface by function bfd_get_iface(), which either finds an existing one in iface_list (from bfd_proto) or allocates a new one. When a session is removed, an associated iface is discharged by bfd_free_iface().

BFD requests are the external API for the other protocols. When a protocol wants a BFD session, it calls bfd_request_session(), which creates a structure bfd_request containing approprite information and an notify hook. This structure is a resource associated with the caller's resource pool. When a BFD protocol is available, a BFD request is submitted to the protocol, an appropriate BFD session is found or created and the request is attached to the session. When a session changes state, all attached requests (and related protocols) are notified. Note that BFD requests do not depend on BFD protocol running. When the BFD protocol is stopped or removed (or not available from beginning), related BFD requests are stored in bfd_wait_list, where waits for a new protocol.

BFD neighbors are just a way to statically configure BFD sessions without requests from other protocol. Structures bfd_neighbor are part of BFD configuration (like static routes in the static protocol). BFD neighbors are handled by BFD protocol like it is a BFD client -- when a BFD neighbor is ready, the protocol just creates a BFD request like any other protocol.

The protocol uses a new generic event loop (structure birdloop) from `io.c`, which supports sockets, timers and events like the main loop. A birdloop is associated with a thread (field thread) in which event hooks are executed. Most functions for setting event sources (like sk_start() or tm_start()) must be called from the context of that thread. Birdloop allows to temporarily acquire the context of that thread for the main thread by calling birdloop_enter() and then birdloop_leave(), which also ensures mutual exclusion with all event hooks. Note that resources associated with a birdloop (like timers) should be attached to the independent resource pool, detached from the main resource tree.

There are two kinds of interaction between the BFD core (running in the BFD thread) and the rest of BFD (running in the main thread). The first kind are configuration calls from main thread to the BFD thread (like bfd_add_session()). These calls are synchronous and use birdloop_enter() mechanism for mutual exclusion. The second kind is a notification about session changes from the BFD thread to the main thread. This is done in an asynchronous way, sesions with pending notifications are linked (in the BFD thread) to notify_list in bfd_proto, and then bfd_notify_hook() in the main thread is activated using bfd_notify_kick() and a pipe. The hook then processes scheduled sessions and calls hooks from associated BFD requests. This notify_list (and state fields in structure bfd_session) is protected by a spinlock in bfd_proto and functions bfd_lock_sessions() / bfd_unlock_sessions().

There are few data races (accessing p->p.debug from TRACE() from the BFD thread and accessing some some private fields of bfd_session from bfd_show_sessions() from the main thread, but these are harmless (i hope).

TODO: document functions and access restrictions for fields in BFD structures.

Supported standards: - RFC 5880 - main BFD standard - RFC 5881 - BFD for IP links - RFC 5882 - generic application of BFD - RFC 5883 - BFD for multihop paths

## 5.3 Border Gateway Protocol

The BGP protocol is implemented in three parts: `bgp.c` which takes care of the connection and most of the interface with BIRD core, `packets.c` handling both incoming and outgoing BGP packets and `attrs.c` containing functions for manipulation with BGP attribute lists.

As opposed to the other existing routing daemons, BIRD has a sophisticated core architecture which is able to keep all the information needed by BGP in the primary routing table, therefore no complex data structures like a central BGP table are needed. This increases memory footprint of a BGP router with many connections, but not too much and, which is more important, it makes BGP much easier to implement.

Each instance of BGP (corresponding to a single BGP peer) is described by a bgp_proto structure to which are attached individual connections represented by bgp_connection (usually, there exists only one connection, but during BGP session setup, there can be more of them). The connections are handled according to the BGP state machine defined in the RFC with all the timers and all the parameters configurable.

In incoming direction, we listen on the connection's socket and each time we receive some input, we pass it to bgp_rx(). It decodes packet headers and the markers and passes complete packets to bgp_rx_packet() which distributes the packet according to its type.

In outgoing direction, we gather all the routing updates and sort them to buckets (bgp_bucket) according to their attributes (we keep a hash table for fast comparison of rta's and a fib which helps us to find if we already have another route for the same destination queued for sending, so that we can replace it with the new one immediately instead of sending both updates). There also exists a special bucket holding all the route withdrawals which cannot be queued anywhere else as they don't have any attributes. If we have any packet to send (due to either new routes or the connection tracking code wanting to send a Open, Keepalive or Notification message), we call bgp_schedule_packet() which sets the corresponding bit in a packet_to_send bit field in bgp_conn and as soon as the transmit socket buffer becomes empty, we call bgp_fire_tx(). It inspects state of all the packet type bits and calls the corresponding bgp_create_xx() functions, eventually rescheduling the same packet type if we have more data of the same type to send.

The processing of attributes consists of two functions: bgp_decode_attrs() for checking of the attribute blocks and translating them to the language of BIRD's extended attributes and bgp_encode_attrs() which does the converse. Both functions are built around a bgp_attr_table array describing all important characteristics of all known attributes. Unknown transitive attributes are attached to the route as EAF_TYPE_OPAQUE byte streams.

BGP protocol implements graceful restart in both restarting (local restart) and receiving (neighbor restart) roles. The first is handled mostly by the graceful restart code in the nest, BGP protocol just handles capabilities, sets gr_wait and locks graceful restart until end-of-RIB mark is received. The second is implemented by internal restart of the BGP state to BS_IDLE and protocol state to PS_START, but keeping the protocol up from the core point of view and therefore maintaining received routes. Routing table refresh cycle (rt_refresh_begin(), rt_refresh_end()) is used for removing stale routes after reestablishment of BGP session during graceful restart.

Supported standards: RFC 4271 - Border Gateway Protocol 4 (BGP) RFC 1997 - BGP Communities Attribute RFC 2385 - Protection of BGP Sessions via TCP MD5 Signature RFC 2545 - Use of BGP Multiprotocol Extensions for IPv6 RFC 2918 - Route Refresh Capability RFC 3107 - Carrying Label Information in BGP RFC 4360 - BGP Extended Communities Attribute RFC 4364 - BGP/MPLS IPv4 Virtual Private Networks RFC 4456 - BGP Route Reflection RFC 4486 - Subcodes for BGP Cease Notification Message RFC 4659 - BGP/MPLS IPv6 Virtual Private Networks RFC 4724 - Graceful Restart Mechanism for BGP RFC 4760 - Multiprotocol extensions for BGP RFC 4798 - Connecting IPv6 Islands over IPv4 MPLS RFC 5065 - AS confederations for BGP RFC 5082 - Generalized TTL Security Mechanism RFC 5492 - Capabilities Advertisement with BGP RFC 5668 - 4-Octet AS Specific BGP Extended Community RFC 5925 - TCP Authentication Option RFC 6286 - AS-Wide Unique BGP Identifier RFC 6514 - BGP PMSI Tunnel Attribute RFC 6608 - Subcodes for BGP Finite State Machine Error RFC 6793 - BGP Support for 4-Octet AS Numbers RFC 7311 - Accumulated IGP Metric Attribute for BGP RFC 7313 - Enhanced Route Refresh Capability for BGP RFC 7432 - BGP MPLS-Based Ethernet VPN RFC 7606 - Revised Error Handling for BGP UPDATE Messages RFC 7911 - Advertisement of Multiple Paths in BGP RFC 7947 - Internet Exchange BGP Route Server RFC 8092 - BGP Large Communities Attribute RFC 8212 - Default EBGP Route Propagation Behavior without Policies RFC 8654 - Extended Message Support for BGP RFC 8950 - Advertising IPv4 NLRI with an IPv6 Next Hop RFC 8955 - Dissemination of Flow Specification Rules RFC 8956 - Dissemination of Flow Specification Rules for IPv6 RFC 9003 - Extended BGP Administrative Shutdown Communication RFC 9072 - Extended Optional Parameters Length for BGP OPEN Message RFC 9117 - Revised Validation Procedure for BGP Flow Specifications RFC 9234 - Route Leak Prevention and Detection Using Roles RFC 9494 - Long-Lived Graceful Restart for BGP RFC 9687 - Send Hold Timer draft-walton-bgp-hostname-capability-02

### Function

int bgp_open (struct bgp_proto * p) -- open a BGP instance

### Arguments

struct bgp_proto * p

  BGP instance

### Description

This function allocates and configures shared BGP resources, mainly listening sockets. Should be called as the last step during initialization (when lock is acquired and neighbor is ready). When error, caller should change state to PS_DOWN and return immediately.

### Function

void bgp_close (struct bgp_proto * p) -- close a BGP instance

### Arguments

struct bgp_proto * p

  BGP instance

### Description

This function frees and deconfigures shared BGP resources.

### Function

int bgp_enable_ao_keys (struct bgp_proto * p) -- Enable TCP-AO keys

### Arguments

struct bgp_proto * p

  BGP instance

### Description

Enable all TCP-AO keys for the listening socket. We accept if some fail in non-fatal way (e.g. kernel does not support specific algorithm), but there must be at least one usable (non-deprecated) active key. In case of failure, we remove all keys, so there is no lasting effect on the listening socket.

### Returns

0 for okay, -1 for failure.

### Function

int bgp_disable_ao_keys (struct bgp_proto * p) -- Disable TCP-AO keys

### Arguments

struct bgp_proto * p

  BGP instance

### Description

Disable all TCP-AO keys for the listening socket. We assume there are no active connection, so no issue with removal of the current key. Errors are ignored.

### Function

int bgp_list_ao_keys (struct bgp_proto * p, const struct ao_key *** ao_keys, int * ao_keys_num) -- List active TCP-AO keys

### Arguments

struct bgp_proto * p

  BGP instance

const struct ao_key *** ao_keys

  Returns array of keys

int * ao_keys_num

  Returns number of keys

### Description

Returns an array of pointers to active TCP-AO keys, for usage with socket functions. The best key is at the first position. The array is allocated from the temporary linpool. If there are no keys (or just no best key), the error is logged and the function fails. Returns: 0 for success, -1 for failure.

### Function

void bgp_start_timer (timer * t, uint value) -- start a BGP timer

### Arguments

timer * t

  timer

uint value

  time (in seconds) to fire (0 to disable the timer)

### Description

This functions calls tm_start() on t with time value and the amount of randomization suggested by the BGP standard. Please use it for all BGP timers.

### Function

void bgp_close_conn (struct bgp_conn * conn) -- close a BGP connection

### Arguments

struct bgp_conn * conn

  connection to close

### Description

This function takes a connection described by the bgp_conn structure, closes its socket and frees all resources associated with it.

### Function

void bgp_update_startup_delay (struct bgp_proto * p) -- update a startup delay

### Arguments

struct bgp_proto * p

  BGP instance

### Description

This function updates a startup delay that is used to postpone next BGP connect. It also handles disable_after_error and might stop BGP instance when error happened and disable_after_error is on.

It should be called when BGP protocol error happened.

### Function

void bgp_handle_graceful_restart (struct bgp_proto * p) -- handle detected BGP graceful restart

### Arguments

struct bgp_proto * p

  BGP instance

### Description

This function is called when a BGP graceful restart of the neighbor is detected (when the TCP connection fails or when a new TCP connection appears). The function activates processing of the restart - starts routing table refresh cycle and activates BGP restart timer. The protocol state goes back to PS_START, but changing BGP state back to BS_IDLE is left for the caller.

### Function

void bgp_graceful_restart_done (struct bgp_channel * c) -- finish active BGP graceful restart

### Arguments

struct bgp_channel * c

  BGP channel

### Description

This function is called when the active BGP graceful restart of the neighbor should be finished for channel c - either successfully (the neighbor sends all paths and reports end-of-RIB for given AFI/SAFI on the new session) or unsuccessfully (the neighbor does not support BGP graceful restart on the new session). The function ends the routing table refresh cycle.

### Function

void bgp_graceful_restart_timeout (timer * t) -- timeout of graceful restart 'restart timer'

### Arguments

timer * t

  timer

### Description

This function is a timeout hook for gr_timer, implementing BGP restart time limit for reestablisment of the BGP session after the graceful restart. When fired, we just proceed with the usual protocol restart.

### Function

void bgp_refresh_begin (struct bgp_channel * c) -- start incoming enhanced route refresh sequence

### Arguments

struct bgp_channel * c

  BGP channel

### Description

This function is called when an incoming enhanced route refresh sequence is started by the neighbor, demarcated by the BoRR packet. The function updates the load state and starts the routing table refresh cycle. Note that graceful restart also uses routing table refresh cycle, but RFC 7313 and load states ensure that these two sequences do not overlap.

### Function

void bgp_refresh_end (struct bgp_channel * c) -- finish incoming enhanced route refresh sequence

### Arguments

struct bgp_channel * c

  BGP channel

### Description

This function is called when an incoming enhanced route refresh sequence is finished by the neighbor, demarcated by the EoRR packet. The function updates the load state and ends the routing table refresh cycle. Routes not received during the sequence are removed by the nest.

### Function

void bgp_connect (struct bgp_proto * p) -- initiate an outgoing connection

### Arguments

struct bgp_proto * p

  BGP instance

### Description

The bgp_connect() function creates a new bgp_conn and initiates a TCP connection to the peer. The rest of connection setup is governed by the BGP state machine as described in the standard.

### Function

struct bgp_proto * bgp_find_proto (sock * sk) -- find existing proto for incoming connection

### Arguments

sock * sk

  TCP socket

### Function

int bgp_incoming_connection (sock * sk, uint dummy UNUSED) -- handle an incoming connection

### Arguments

sock * sk

  TCP socket

uint dummy UNUSED

  -- undescribed --

### Description

This function serves as a socket hook for accepting of new BGP connections. It searches a BGP instance corresponding to the peer which has connected and if such an instance exists, it creates a bgp_conn structure, attaches it to the instance and either sends an Open message or (if there already is an active connection) it closes the new connection by sending a Notification message.

### Function

void bgp_error (struct bgp_conn * c, uint code, uint subcode, byte * data, int len) -- report a protocol error

### Arguments

struct bgp_conn * c

  connection

uint code

  error code (according to the RFC)

uint subcode

  error sub-code

byte * data

  data to be passed in the Notification message

int len

  length of the data

### Description

bgp_error() sends a notification packet to tell the other side that a protocol error has occurred (including the data considered erroneous if possible) and closes the connection.

### Function

void bgp_store_error (struct bgp_proto * p, struct bgp_conn * c, u8 class, u32 code) -- store last error for status report

### Arguments

struct bgp_proto * p

  BGP instance

struct bgp_conn * c

  connection

u8 class

  error class (BE_xxx constants)

u32 code

  error code (class specific)

### Description

bgp_store_error() decides whether given error is interesting enough and store that error to last_error variables of p

### Function

int bgp_fire_tx (struct bgp_conn * conn) -- transmit packets

### Arguments

struct bgp_conn * conn

  connection

### Description

Whenever the transmit buffers of the underlying TCP connection are free and we have any packets queued for sending, the socket functions call bgp_fire_tx() which takes care of selecting the highest priority packet queued (Notification > Keepalive > Open > Update), assembling its header and body and sending it to the connection.

### Function

void bgp_schedule_packet (struct bgp_conn * conn, struct bgp_channel * c, int type) -- schedule a packet for transmission

### Arguments

struct bgp_conn * conn

  connection

struct bgp_channel * c

  channel

int type

  packet type

### Description

Schedule a packet of type type to be sent as soon as possible.

### Function

const char * bgp_error_dsc (uint code, uint subcode) -- return BGP error description

### Arguments

uint code

  BGP error code

uint subcode

  BGP error subcode

### Description

bgp_error_dsc() returns error description for BGP errors which might be static string or given temporary buffer.

### Function

void bgp_rx_packet (struct bgp_conn * conn, byte * pkt, uint len) -- handle a received packet

### Arguments

struct bgp_conn * conn

  BGP connection

byte * pkt

  start of the packet

uint len

  packet size

### Description

bgp_rx_packet() takes a newly received packet and calls the corresponding packet handler according to the packet type.

### Function

int bgp_rx (sock * sk, uint size) -- handle received data

### Arguments

sock * sk

  socket

uint size

  amount of data received

### Description

bgp_rx() is called by the socket layer whenever new data arrive from the underlying TCP connection. It assembles the data fragments to packets, checks their headers and framing and passes complete packets to bgp_rx_packet().

### Function

ea_list * bgp_export_attrs (struct bgp_export_state * s, ea_list * attrs) -- export BGP attributes

### Arguments

struct bgp_export_state * s

  BGP export state

ea_list * attrs

  a list of extended attributes

### Description

The bgp_export_attrs() function takes a list of attributes and merges it to one newly allocated and sorted segment. Attributes are validated and normalized by type-specific export hooks and attribute flags are updated. Some attributes may be eliminated (e.g. unknown non-tranitive attributes, or empty community sets).

### Result

one sorted attribute list segment, or NULL if attributes are unsuitable.

### Function

int bgp_encode_attrs (struct bgp_write_state * s, ea_list * attrs, byte * buf, byte * end) -- encode BGP attributes

### Arguments

struct bgp_write_state * s

  BGP write state

ea_list * attrs

  a list of extended attributes

byte * buf

  buffer

byte * end

  buffer end

### Description

The bgp_encode_attrs() function takes a list of extended attributes and converts it to its BGP representation (a part of an Update message). BGP write state may be fake when called from MRT protocol.

### Result

Length of the attribute block generated or -1 if not enough space.

### Function

ea_list * bgp_decode_attrs (struct bgp_parse_state * s, byte * data, uint len) -- check and decode BGP attributes

### Arguments

struct bgp_parse_state * s

  BGP parse state

byte * data

  start of attribute block

uint len

  length of attribute block

### Description

This function takes a BGP attribute block (a part of an Update message), checks its consistency and converts it to a list of BIRD route attributes represented by an (uncached) rta.

## 5.4 BGP Monitoring Protocol (BMP)

Supported standards: o RFC 7854 - BMP standard

TODO: - Support Peer Distinguisher ID in Per-Peer Header - Support peer type as RD Instance in Peer Type field of Per-Peer Header. Currently, there are supported Global and Local Instance Peer types - Support corresponding FSM event code during send PEER DOWN NOTIFICATION - Support DE_CONFIGURED PEER DOWN REASON code in PEER DOWN NOTIFICATION message - If connection with BMP collector will lost then we don't establish connection again - Set Peer Type by its a global and local-scope IP address

The BMP session is managed by a simple state machine with three states: Idle (!started, !sk), Connect (!started, sk active), and Established (started). It has three events: connect successful (Connect -> Established), socket error (any -> Idle), and connect timeout (Idle/Connect -> Connect, resetting the TCP socket).

### Function

void bmp_put_per_peer_hdr (buffer * stream, const struct bmp_peer_hdr_info * peer) -- serializes Per-Peer Header

### Arguments

buffer * stream

  -- undescribed --

const struct bmp_peer_hdr_info * peer

  -- undescribed --

### BGP Monitoring Protocol (BMP)

### Function

void bmp_startup (struct bmp_proto * p) -- enter established state

### Arguments

struct bmp_proto * p

  BMP instance

### Description

The bgp_startup() function is called when the BMP session is established. It sends initiation and peer up messagages.

### Function

void bmp_down (struct bmp_proto * p) -- leave established state

### Arguments

struct bmp_proto * p

  BMP instance

### Description

The bgp_down() function is called when the BMP session fails. The caller is responsible for changing protocol state.

### Function

void bmp_connect (struct bmp_proto * p) -- initiate an outgoing connection

### Arguments

struct bmp_proto * p

  BMP instance

### Description

The bmp_connect() function creates the socket and initiates an outgoing TCP connection to the monitoring station. It is called to enter Connect state.

### Function

int bmp_start (struct proto * P) -- initialize internal resources of BMP implementation.

### Arguments

struct proto * P

  -- undescribed --

### NOTE

It does not connect to BMP collector yet.

## 5.5 Open Shortest Path First (OSPF)

The OSPF protocol is quite complicated and its complex implemenation is split to many files. In `ospf.c`, you will find mainly the interface for communication with the core (e.g., reconfiguration hooks, shutdown and initialisation and so on). File `iface.c` contains the interface state machine and functions for allocation and deallocation of OSPF's interface data structures. Source `neighbor.c` includes the neighbor state machine and functions for election of Designated Router and Backup Designated router. In `packet.c`, you will find various functions for sending and receiving generic OSPF packets. There are also routines for authentication and checksumming. In `hello.c`, there are routines for sending and receiving of hello packets as well as functions for maintaining wait times and the inactivity timer. Files `lsreq.c`, `lsack.c`, `dbdes.c` contain functions for sending and receiving of link-state requests, link-state acknowledgements and database descriptions respectively. In `lsupd.c`, there are functions for sending and receiving of link-state updates and also the flooding algorithm. Source `topology.c` is a place where routines for searching LSAs in the link-state database, adding and deleting them reside, there also are functions for originating of various types of LSAs (router LSA, net LSA, external LSA). File `rt.c` contains routines for calculating the routing table. `lsalib.c` is a set of various functions for working with the LSAs (endianity conversions, calculation of checksum etc.).

One instance of the protocol is able to hold LSA databases for multiple OSPF areas, to exchange routing information between multiple neighbors and to calculate the routing tables. The core structure is ospf_proto to which multiple ospf_area and ospf_iface structures are connected. ospf_proto is also connected to top_hash_graph which is a dynamic hashing structure that describes the link-state database. It allows fast search, addition and deletion. Each LSA is kept in two pieces: header and body. Both of them are kept in the endianity of the CPU.

In OSPFv2 specification, it is implied that there is one IP prefix for each physical network/interface (unless it is an ptp link). But in modern systems, there might be more independent IP prefixes associated with an interface. To handle this situation, we have one ospf_iface for each active IP prefix (instead for each active iface); This behaves like virtual interface for the purpose of OSPF. If we receive packet, we associate it with a proper virtual interface mainly according to its source address.

OSPF keeps one socket per ospf_iface. This allows us (compared to one socket approach) to evade problems with a limit of multicast groups per socket and with sending multicast packets to appropriate interface in a portable way. The socket is associated with underlying physical iface and should not receive packets received on other ifaces (unfortunately, this is not true on BSD). Generally, one packet can be received by more sockets (for example, if there are more ospf_iface on one physical iface), therefore we explicitly filter received packets according to src/dst IP address and received iface.

Vlinks are implemented using particularly degenerate form of ospf_iface, which has several exceptions: it does not have its iface or socket (it copies these from 'parent' ospf_iface) and it is present in iface list even when down (it is not freed in ospf_iface_down()).

The heart beat of ospf is ospf_disp(). It is called at regular intervals (ospf_proto->tick). It is responsible for aging and flushing of LSAs in the database, updating topology information in LSAs and for routing table calculation.

To every ospf_iface, we connect one or more ospf_neighbor's -- a structure containing many timers and queues for building adjacency and for exchange of routing messages.

BIRD's OSPF implementation respects RFC2328 in every detail, but some of internal algorithms do differ. The RFC recommends making a snapshot of the link-state database when a new adjacency is forming and sending the database description packets based on the information in this snapshot. The database can be quite large in some networks, so rather we walk through a slist structure which allows us to continue even if the actual LSA we were working with is deleted. New LSAs are added at the tail of this slist.

We also do not keep a separate OSPF routing table, because the core helps us by being able to recognize when a route is updated to an identical one and it suppresses the update automatically. Due to this, we can flush all the routes we have recalculated and also those we have deleted to the core's routing table and the core will take care of the rest. This simplifies the process and conserves memory.

Supported standards: - RFC 2328 - main OSPFv2 standard - RFC 5340 - main OSPFv3 standard - RFC 3101 - OSPFv2 NSSA areas - RFC 3623 - OSPFv2 Graceful Restart - RFC 4576 - OSPFv2 VPN loop prevention - RFC 5187 - OSPFv3 Graceful Restart - RFC 5250 - OSPFv2 Opaque LSAs - RFC 5709 - OSPFv2 HMAC-SHA Cryptographic Authentication - RFC 5838 - OSPFv3 Support of Address Families - RFC 6549 - OSPFv2 Multi-Instance Extensions - RFC 6987 - OSPF Stub Router Advertisement - RFC 7166 - OSPFv3 Authentication Trailer - RFC 7770 - OSPF Router Information LSA

### Function

void ospf_disp (timer * timer) -- invokes routing table calculation, aging and also area_disp()

### Arguments

timer * timer

  timer usually called every ospf_proto->tick second, timer->data point to ospf_proto

### Function

int ospf_preexport (struct channel * C, rte * e) -- accept or reject new route from nest's routing table

### Arguments

struct channel * C

  -- undescribed --

rte * e

  -- undescribed --

### Description

Its quite simple. It does not accept our own routes and leaves the decision on import to the filters.

### Function

int ospf_shutdown (struct proto * P) -- Finish of OSPF instance

### Arguments

struct proto * P

  OSPF protocol instance

### Description

RFC does not define any action that should be taken before router shutdown. To make my neighbors react as fast as possible, I send them hello packet with empty neighbor list. They should start their neighbor state machine with event NEIGHBOR_1WAY.

### Function

int ospf_reconfigure (struct proto * P, struct proto_config * CF) -- reconfiguration hook

### Arguments

struct proto * P

  current instance of protocol (with old configuration)

struct proto_config * CF

  -- undescribed --

### Description

This hook tries to be a little bit intelligent. Instance of OSPF will survive change of many constants like hello interval, password change, addition or deletion of some neighbor on nonbroadcast network, cost of interface, etc.

### Function

struct top_hash_entry * ospf_install_lsa (struct ospf_proto * p, struct ospf_lsa_header * lsa, u32 type, u32 domain, void * body) -- install new LSA into database

### Arguments

struct ospf_proto * p

  OSPF protocol instance

struct ospf_lsa_header * lsa

  LSA header

u32 type

  type of LSA

u32 domain

  domain of LSA

void * body

  pointer to LSA body

### Description

This function ensures installing new LSA received in LS update into LSA database. Old instance is replaced. Several actions are taken to detect if new routing table calculation is necessary. This is described in 13.2 of RFC 2328. This function is for received LSA only, locally originated LSAs are installed by ospf_originate_lsa().

The LSA body in body is expected to be mb_allocated by the caller and its ownership is transferred to the LSA entry structure.

### Function

void ospf_advance_lsa (struct ospf_proto * p, struct top_hash_entry * en, struct ospf_lsa_header * lsa, u32 type, u32 domain, void * body) -- handle received unexpected self-originated LSA

### Arguments

struct ospf_proto * p

  OSPF protocol instance

struct top_hash_entry * en

  current LSA entry or NULL

struct ospf_lsa_header * lsa

  new LSA header

u32 type

  type of LSA

u32 domain

  domain of LSA

void * body

  pointer to LSA body

### Description

This function handles received unexpected self-originated LSA (lsa, body) by either advancing sequence number of the local LSA instance (en) and propagating it, or installing the received LSA and immediately flushing it (if there is no local LSA; i.e., en is NULL or MaxAge).

The LSA body in body is expected to be mb_allocated by the caller and its ownership is transferred to the LSA entry structure or it is freed.

### Function

struct top_hash_entry * ospf_originate_lsa (struct ospf_proto * p, struct ospf_new_lsa * lsa) -- originate new LSA

### Arguments

struct ospf_proto * p

  OSPF protocol instance

struct ospf_new_lsa * lsa

  New LSA specification

### Description

This function prepares a new LSA, installs it into the LSA database and floods it. If the new LSA cannot be originated now (because the old instance was originated within MinLSInterval, or because the LSA seqnum is currently wrapping), the origination is instead scheduled for later. If the new LSA is equivalent to the current LSA, the origination is skipped. In all cases, the corresponding LSA entry is returned. The new LSA is based on the LSA specification (lsa) and the LSA body from lsab buffer of p, which is emptied after the call. The opposite of this function is ospf_flush_lsa().

### Function

void ospf_flush_lsa (struct ospf_proto * p, struct top_hash_entry * en) -- flush LSA from OSPF domain

### Arguments

struct ospf_proto * p

  OSPF protocol instance

struct top_hash_entry * en

  LSA entry to flush

### Description

This function flushes en from the OSPF domain by setting its age to LSA_MAXAGE and flooding it. That also triggers subsequent events in LSA lifecycle leading to removal of the LSA from the LSA database (e.g. the LSA content is freed when flushing is acknowledged by neighbors). The function does nothing if the LSA is already being flushed. LSA entries are not immediately removed when being flushed, the caller may assume that en still exists after the call. The function is the opposite of ospf_originate_lsa() and is supposed to do the right thing even in cases of postponed origination.

### Function

void ospf_update_lsadb (struct ospf_proto * p) -- update LSA database

### Arguments

struct ospf_proto * p

  OSPF protocol instance

### Description

This function is periodicaly invoked from ospf_disp(). It does some periodic or postponed processing related to LSA entries. It originates postponed LSAs scheduled by ospf_originate_lsa(), It continues in flushing processes started by ospf_flush_lsa(). It also periodically refreshs locally originated LSAs -- when the current instance is older LSREFRESHTIME, a new instance is originated. Finally, it also ages stored LSAs and flushes ones that reached LSA_MAXAGE.

The RFC 2328 says that a router should periodically check checksums of all stored LSAs to detect hardware problems. This is not implemented.

### Function

void ospf_originate_ext_lsa (struct ospf_proto * p, struct ospf_area * oa, ort * nf, u8 mode, u32 metric, u32 ebit, ip_addr fwaddr, u32 tag, int pbit, int dn) -- new route received from nest and filters

### Arguments

struct ospf_proto * p

  OSPF protocol instance

struct ospf_area * oa

  ospf_area for which LSA is originated

ort * nf

  network prefix and mask

u8 mode

  the mode of the LSA (LSA_M_EXPORT or LSA_M_RTCALC)

u32 metric

  the metric of a route

u32 ebit

  E-bit for route metric (bool)

ip_addr fwaddr

  the forwarding address

u32 tag

  the route tag

int pbit

  P-bit for NSSA LSAs (bool), ignored for external LSAs

int dn

  -- undescribed --

### Description

If I receive a message that new route is installed, I try to originate an external LSA. If oa is an NSSA area, NSSA-LSA is originated instead. oa should not be a stub area. src does not specify whether the LSA is external or NSSA, but it specifies the source of origination - the export from ospf_rt_notify(), or the NSSA-EXT translation.

### Function

struct top_graph * ospf_top_new (struct ospf_proto * p, pool * pool) -- allocated new topology database

### Arguments

struct ospf_proto * p

  OSPF protocol instance

pool * pool

  pool for allocation

### Description

This dynamically hashed structure is used for keeping LSAs. Mainly it is used for the LSA database of the OSPF protocol, but also for LSA retransmission and request lists of OSPF neighbors.

### Function

void ospf_neigh_chstate (struct ospf_neighbor * n, u8 state) -- handles changes related to new or lod state of neighbor

### Arguments

struct ospf_neighbor * n

  OSPF neighbor

u8 state

  new state

### Description

Many actions have to be taken acording to a change of state of a neighbor. It starts rxmt timers, call interface state machine etc.

### Function

void ospf_neigh_sm (struct ospf_neighbor * n, int event) -- ospf neighbor state machine

### Arguments

struct ospf_neighbor * n

  neighor

int event

  actual event

### Description

This part implements the neighbor state machine as described in 10.3 of RFC 2328. The only difference is that state NEIGHBOR_ATTEMPT is not used. We discover neighbors on nonbroadcast networks in the same way as on broadcast networks. The only difference is in sending hello packets. These are sent to IPs listed in ospf_iface->nbma_list .

### Function

void ospf_dr_election (struct ospf_iface * ifa) -- (Backup) Designed Router election

### Arguments

struct ospf_iface * ifa

  actual interface

### Description

When the wait timer fires, it is time to elect (Backup) Designated Router. Structure describing me is added to this list so every electing router has the same list. Backup Designated Router is elected before Designated Router. This process is described in 9.4 of RFC 2328. The function is supposed to be called only from ospf_iface_sm() as a part of the interface state machine.

### Function

void ospf_iface_chstate (struct ospf_iface * ifa, u8 state) -- handle changes of interface state

### Arguments

struct ospf_iface * ifa

  OSPF interface

u8 state

  new state

### Description

Many actions must be taken according to interface state changes. New network LSAs must be originated, flushed, new multicast sockets to listen for messages for ALLDROUTERS have to be opened, etc.

### Function

void ospf_iface_sm (struct ospf_iface * ifa, int event) -- OSPF interface state machine

### Arguments

struct ospf_iface * ifa

  OSPF interface

int event

  event comming to state machine

### Description

This fully respects 9.3 of RFC 2328 except we have slightly different handling of DOWN and LOOP state. We remove intefaces that are DOWN. DOWN state is used when an interface is waiting for a lock. LOOP state is used when an interface does not have a link.

### Function

int ospf_rx_hook (sock * sk, uint len)

### Arguments

sock * sk

  socket we received the packet.

uint len

  length of the packet

### Description

This is the entry point for messages from neighbors. Many checks (like authentication, checksums, size) are done before the packet is passed to non generic functions.

### Function

int lsa_validate (struct ospf_lsa_header * lsa, u32 lsa_type, int ospf2, void * body) -- check whether given LSA is valid

### Arguments

struct ospf_lsa_header * lsa

  LSA header

u32 lsa_type

  internal LSA type (LSA_T_xxx)

int ospf2

  true for OSPFv2, false for OSPFv3

void * body

  pointer to LSA body

### Description

Checks internal structure of given LSA body (minimal length, consistency). Returns true if valid.

### Function

void ospf_send_dbdes (struct ospf_proto * p, struct ospf_neighbor * n) -- transmit database description packet

### Arguments

struct ospf_proto * p

  OSPF protocol instance

struct ospf_neighbor * n

  neighbor

### Description

Sending of a database description packet is described in 10.8 of RFC 2328. Reception of each packet is acknowledged in the sequence number of another. When I send a packet to a neighbor I keep a copy in a buffer. If the neighbor does not reply, I don't create a new packet but just send the content of the buffer.

### Function

void ospf_rt_spf (struct ospf_proto * p) -- calculate internal routes

### Arguments

struct ospf_proto * p

  OSPF protocol instance

### Description

Calculation of internal paths in an area is described in 16.1 of RFC 2328. It's based on Dijkstra's shortest path tree algorithms. This function is invoked from ospf_disp().

## 5.6 Pipe

The Pipe protocol is very simple. It just connects to two routing tables using proto_add_announce_hook() and whenever it receives a rt_notify() about a change in one of the tables, it converts it to a rte_update() in the other one.

To avoid pipe loops, Pipe keeps a `being updated' flag in each routing table.

A pipe has two announce hooks, the first connected to the main table, the second connected to the peer table. When a new route is announced on the main table, it gets checked by an export filter in ahook 1, and, after that, it is announced to the peer table via rte_update(), an import filter in ahook 2 is called. When a new route is announced in the peer table, an export filter in ahook2 and an import filter in ahook 1 are used. Oviously, there is no need in filtering the same route twice, so both import filters are set to accept, while user configured 'import' and 'export' filters are used as export filters in ahooks 2 and 1. Route limits are handled similarly, but on the import side of ahooks.

## 5.7 Router Advertisements

The RAdv protocol is implemented in two files: `radv.c` containing the interface with BIRD core and the protocol logic and `packets.c` handling low level protocol stuff (RX, TX and packet formats). The protocol does not export any routes.

The RAdv is structured in the usual way - for each handled interface there is a structure radv_iface that contains a state related to that interface together with its resources (a socket, a timer). There is also a prepared RA stored in a TX buffer of the socket associated with an iface. These iface structures are created and removed according to iface events from BIRD core handled by radv_if_notify() callback.

The main logic of RAdv consists of two functions: radv_iface_notify(), which processes asynchronous events (specified by RA_EV_* codes), and radv_timer(), which triggers sending RAs and computes the next timeout.

The RAdv protocol could receive routes (through radv_preexport() and radv_rt_notify()), but only the configured trigger route is tracked (in active var). When a radv protocol is reconfigured, the connected routing table is examined (in radv_check_active()) to have proper active value in case of the specified trigger prefix was changed.

Supported standards: RFC 4861 - main RA standard RFC 4191 - Default Router Preferences and More-Specific Routes RFC 6106 - DNS extensions (RDDNS, DNSSL)

## 5.8 Routing Information Protocol (RIP)

The RIP protocol is implemented in two files: `rip.c` containing the protocol logic, route management and the protocol glue with BIRD core, and `packets.c` handling RIP packet processing, RX, TX and protocol sockets.

Each instance of RIP is described by a structure rip_proto, which contains an internal RIP routing table, a list of protocol interfaces and the main timer responsible for RIP routing table cleanup.

RIP internal routing table contains incoming and outgoing routes. For each network (represented by structure rip_entry) there is one outgoing route stored directly in rip_entry and an one-way linked list of incoming routes (structures rip_rte). The list contains incoming routes from different RIP neighbors, but only routes with the lowest metric are stored (i.e., all stored incoming routes have the same metric).

Note that RIP itself does not select outgoing route, that is done by the core routing table. When a new incoming route is received, it is propagated to the RIP table by rip_update_rte() and possibly stored in the list of incoming routes. Then the change may be propagated to the core by rip_announce_rte(). The core selects the best route and propagate it to RIP by rip_rt_notify(), which updates outgoing route part of rip_entry and possibly triggers route propagation by rip_trigger_update().

RIP interfaces are represented by structures rip_iface. A RIP interface contains a per-interface socket, a list of associated neighbors, interface configuration, and state information related to scheduled interface events and running update sessions. RIP interfaces are added and removed based on core interface notifications.

There are two RIP interface events - regular updates and triggered updates. Both are managed from the RIP interface timer (rip_iface_timer()). Regular updates are called at fixed interval and propagate the whole routing table, while triggered updates are scheduled by rip_trigger_update() due to some routing table change and propagate only the routes modified since the time they were scheduled. There are also unicast-destined requested updates, but these are sent directly as a reaction to received RIP request message. The update session is started by rip_send_table(). There may be at most one active update session per interface, as the associated state (including the fib iterator) is stored directly in rip_iface structure.

RIP neighbors are represented by structures rip_neighbor. Compared to neighbor handling in other routing protocols, RIP does not have explicit neighbor discovery and adjacency maintenance, which makes the rip_neighbor related code a bit peculiar. RIP neighbors are interlinked with core neighbor structures (neighbor) and use core neighbor notifications to ensure that RIP neighbors are timely removed. RIP neighbors are added based on received route notifications and removed based on core neighbor and RIP interface events.

RIP neighbors are linked by RIP routes and use counter to track the number of associated routes, but when these RIP routes timeout, associated RIP neighbor is still alive (with zero counter). When RIP neighbor is removed but still has some associated routes, it is not freed, just changed to detached state (core neighbors and RIP ifaces are unlinked), then during the main timer cleanup phase the associated routes are removed and the rip_neighbor structure is finally freed.

Supported standards: RFC 1058 - RIPv1 RFC 2453 - RIPv2 RFC 2080 - RIPng RFC 2091 - Triggered RIP for demand circuits RFC 4822 - RIP cryptographic authentication

### Function

void rip_announce_rte (struct rip_proto * p, struct rip_entry * en) -- announce route from RIP routing table to the core

### Arguments

struct rip_proto * p

  RIP instance

struct rip_entry * en

  related network

### Description

The function takes a list of incoming routes from en, prepare appropriate rte for the core and propagate it by rte_update().

### Function

void rip_update_rte (struct rip_proto * p, net_addr * n, struct rip_rte * new) -- enter a route update to RIP routing table

### Arguments

struct rip_proto * p

  RIP instance

net_addr * n

  -- undescribed --

struct rip_rte * new

  a rip_rte representing the new route

### Description

The function is called by the RIP packet processing code whenever it receives a reachable route. The appropriate routing table entry is found and the list of incoming routes is updated. Eventually, the change is also propagated to the core by rip_announce_rte(). Note that for unreachable routes, rip_withdraw_rte() should be called instead of rip_update_rte().

### Function

void rip_withdraw_rte (struct rip_proto * p, net_addr * n, struct rip_neighbor * from) -- enter a route withdraw to RIP routing table

### Arguments

struct rip_proto * p

  RIP instance

net_addr * n

  -- undescribed --

struct rip_neighbor * from

  a rip_neighbor propagating the withdraw

### Description

The function is called by the RIP packet processing code whenever it receives an unreachable route. The incoming route for given network from nbr from is removed. Eventually, the change is also propagated by rip_announce_rte().

### Function

void rip_timer (timer * t) -- RIP main timer hook

### Arguments

timer * t

  timer

### Description

The RIP main timer is responsible for routing table maintenance. Invalid or expired routes (rip_rte) are removed and garbage collection of stale routing table entries (rip_entry) is done. Changes are propagated to core tables, route reload is also done here. Note that garbage collection uses a maximal GC time, while interfaces maintain an illusion of per-interface GC times in rip_send_response().

Keeping incoming routes and the selected outgoing route are two independent functions, therefore after garbage collection some entries now considered invalid (RIP_ENTRY_DUMMY) still may have non-empty list of incoming routes, while some valid entries (representing an outgoing route) may have that list empty.

The main timer is not scheduled periodically but it uses the time of the current next event and the minimal interval of any possible event to compute the time of the next run.

### Function

void rip_iface_timer (timer * t) -- RIP interface timer hook

### Arguments

timer * t

  timer

### Description

RIP interface timers are responsible for scheduling both regular and triggered updates. Fixed, delay-independent period is used for regular updates, while minimal separating interval is enforced for triggered updates. The function also ensures that a new update is not started when the old one is still running.

### Function

void rip_send_table (struct rip_proto * p, struct rip_iface * ifa, ip_addr addr, btime changed) -- RIP interface timer hook

### Arguments

struct rip_proto * p

  RIP instance

struct rip_iface * ifa

  RIP interface

ip_addr addr

  destination IP address

btime changed

  time limit for triggered updates

### Description

The function activates an update session and starts sending routing update packets (using rip_send_response()). The session may be finished during the call or may continue in rip_tx_hook() until all appropriate routes are transmitted. Note that there may be at most one active update session per interface, the function will terminate the old active session before activating the new one.

### Function

void rip_rxmt_timeout (timer * t) -- RIP retransmission timer hook

### Arguments

timer * t

  timer

### Description

In Demand Circuit mode, update packets must be acknowledged to ensure reliability. If they are not acknowledged, we need to retransmit them.

## 5.9 RPKI To Router (RPKI-RTR)

The RPKI-RTR protocol is implemented in several files: `rpki.c` containing the routes handling, protocol logic, timer events, cache connection, reconfiguration, configuration and protocol glue with BIRD core, `packets.c` containing the RPKI packets handling and finally all transports files: `transport.c`, `tcp_transport.c` and `ssh_transport.c`.

The `transport.c` is a middle layer and interface for each specific transport. Transport is a way how to wrap a communication with a cache server. There is supported an unprotected TCP transport and an encrypted SSHv2 transport. The SSH transport requires LibSSH library. LibSSH is loading dynamically using dlopen() function. SSH support is integrated in `sysdep/unix/io.c`. Each transport must implement an initialization function, an open function and a socket identification function. That's all.

This implementation is based on the RTRlib (http://rpki.realmv6.org/). The BIRD takes over files `packets.c`, `rtr.c` (inside `rpki.c`), `transport.c`, `tcp_transport.c` and `ssh_transport.c` from RTRlib.

A RPKI-RTR connection is described by a structure rpki_cache. The main logic is located in rpki_cache_change_state() function. There is a state machine. The standard starting state flow looks like `Down` > `Connecting` > `Sync-Start` > `Sync-Running` > `Established` and then the last three states are periodically repeated.

`Connecting` state establishes the transport connection. The state from a call rpki_cache_change_state(CONNECTING) to a call rpki_connected_hook()

`Sync-Start` state starts with sending `Reset Query` or `Serial Query` and then waits for `Cache Response`. The state from rpki_connected_hook() to rpki_handle_cache_response_pdu()

During `Sync-Running` BIRD receives data with IPv4/IPv6 Prefixes from cache server. The state starts from rpki_handle_cache_response_pdu() and ends in rpki_handle_end_of_data_pdu().

`Established` state means that BIRD has synced all data with cache server. Schedules a refresh timer event that invokes `Sync-Start`. Schedules Expire timer event and stops a Retry timer event.

`Transport Error` state means that we have some troubles with a network connection. We cannot connect to a cache server or we wait too long for some expected PDU for received - `Cache Response` or `End of Data`. It closes current connection and schedules a Retry timer event.

`Fatal Protocol Error` is occurred e.g. by received a bad Session ID. We restart a protocol, so all ROAs are flushed immediately.

The RPKI-RTR protocol (RFC 6810 bis) defines configurable refresh, retry and expire intervals. For maintaining a connection are used timer events that are scheduled by rpki_schedule_next_refresh(), rpki_schedule_next_retry() and rpki_schedule_next_expire() functions.

A Refresh timer event performs a sync of `Established` connection. So it shifts state to `Sync-Start`. If at the beginning of second call of a refresh event is connection in `Sync-Start` state then we didn't receive a `Cache Response` from a cache server and we invoke `Transport Error` state.

A Retry timer event attempts to connect cache server. It is activated after `Transport Error` state and terminated by reaching `Established` state. If cache connection is still connecting to the cache server at the beginning of an event call then the Retry timer event invokes `Transport Error` state.

An Expire timer event checks expiration of ROAs. If a last successful sync was more ago than the expire interval then the Expire timer event invokes a protocol restart thereby removes all ROAs learned from that cache server and continue trying to connect to cache server. The Expire event is activated by initial successful loading of ROAs, receiving End of Data PDU.

A reconfiguration of cache connection works well without restarting when we change only intervals values.

Supported standards: - RFC 6810 - main RPKI-RTR standard - RFC 6810 bis - an explicit timing parameters and protocol version number negotiation

### Function

const char * rpki_cache_state_to_str (enum rpki_cache_state state) -- give a text representation of cache state

### Arguments

enum rpki_cache_state state

  A cache state

### Description

The function converts logic cache state into string.

### Function

void rpki_start_cache (struct rpki_cache * cache) -- connect to a cache server

### Arguments

struct rpki_cache * cache

  RPKI connection instance

### Description

This function is a high level method to kick up a connection to a cache server.

### Function

void rpki_force_restart_proto (struct rpki_proto * p) -- force shutdown and start protocol again

### Arguments

struct rpki_proto * p

  RPKI protocol instance

### Description

This function calls shutdown and frees all protocol resources as well. After calling this function should be no operations with protocol data, they could be freed already.

### Function

void rpki_cache_change_state (struct rpki_cache * cache, const enum rpki_cache_state new_state) -- check and change cache state

### Arguments

struct rpki_cache * cache

  RPKI cache instance

const enum rpki_cache_state new_state

  suggested new state

### Description

This function makes transitions between internal states. It represents the core of logic management of RPKI protocol. Cannot transit into the same state as cache is in already.

### Function

void rpki_refresh_hook (timer * tm) -- control a scheduling of downloading data from cache server

### Arguments

timer * tm

  refresh timer with cache connection instance in data

### Description

This function is periodically called during ESTABLISHED or SYNC* state cache connection. The first refresh schedule is invoked after receiving a `End of Data` PDU and has run by some ERROR is occurred.

### Function

void rpki_retry_hook (timer * tm) -- control a scheduling of retrying connection to cache server

### Arguments

timer * tm

  retry timer with cache connection instance in data

### Description

This function is periodically called during ERROR* state cache connection. The first retry schedule is invoked after any ERROR* state occurred and ends by reaching of ESTABLISHED state again.

### Function

void rpki_expire_hook (timer * tm) -- control a expiration of ROA entries

### Arguments

timer * tm

  expire timer with cache connection instance in data

### Description

This function is scheduled after received a `End of Data` PDU. A waiting interval is calculated dynamically by last update. If we reach an expiration time then we invoke a restarting of the protocol.

### Function

const char * rpki_check_refresh_interval (uint seconds) -- check validity of refresh interval value

### Arguments

uint seconds

  suggested value

### Description

This function validates value and should return `NULL`. If the check doesn't pass then returns error message.

### Function

const char * rpki_check_retry_interval (uint seconds) -- check validity of retry interval value

### Arguments

uint seconds

  suggested value

### Description

This function validates value and should return `NULL`. If the check doesn't pass then returns error message.

### Function

const char * rpki_check_expire_interval (uint seconds) -- check validity of expire interval value

### Arguments

uint seconds

  suggested value

### Description

This function validates value and should return `NULL`. If the check doesn't pass then returns error message.

### Function

const char * rpki_get_cache_ident (struct rpki_cache * cache) -- give a text representation of cache server name

### Arguments

struct rpki_cache * cache

  RPKI connection instance

### Description

The function converts cache connection into string.

### Function

int rpki_reconfigure_cache (struct rpki_proto *p UNUSED, struct rpki_cache * cache, struct rpki_config * new, struct rpki_config * old) -- a cache reconfiguration

### Arguments

struct rpki_proto *p UNUSED

  -- undescribed --

struct rpki_cache * cache

  a cache connection

struct rpki_config * new

  new RPKI configuration

struct rpki_config * old

  old RPKI configuration

### Description

This function reconfigures existing single cache server connection with new existing configuration. Generally, a change of time intervals could be reconfigured without restarting and all others changes requires a restart of protocol. Returns `NEED_TO_RESTART` or `SUCCESSFUL_RECONF`.

### Function

int rpki_reconfigure (struct proto * P, struct proto_config * CF) -- a protocol reconfiguration hook

### Arguments

struct proto * P

  a protocol instance

struct proto_config * CF

  a new protocol configuration

### Description

This function reconfigures whole protocol. It sets new protocol configuration into a protocol structure. Returns `NEED_TO_RESTART` or `SUCCESSFUL_RECONF`.

### Function

void rpki_check_config (struct rpki_config * cf) -- check and complete configuration of RPKI protocol

### Arguments

struct rpki_config * cf

  RPKI configuration

### Description

This function is called at the end of parsing RPKI protocol configuration.

### Function

struct pdu_header * rpki_pdu_back_to_network_byte_order (struct pdu_header * out, const struct pdu_header * in) -- convert host-byte order PDU back to network-byte order

### Arguments

struct pdu_header * out

  allocated memory for writing a converted PDU of size in->len

const struct pdu_header * in

  host-byte order PDU

### Assumed

`A == ntoh(ntoh(A))`

### Function

int rpki_check_receive_packet (struct rpki_cache * cache, const struct pdu_header * pdu) -- make a basic validation of received RPKI PDU header

### Arguments

struct rpki_cache * cache

  cache connection instance

const struct pdu_header * pdu

  RPKI PDU in network byte order

### Description

This function checks protocol version, PDU type, version and size. If all is all right then function returns `RPKI_SUCCESS` otherwise sends Error PDU and returns `RPKI_ERROR`.

### Function

net_addr_union * rpki_prefix_pdu_2_net_addr (const struct pdu_header * pdu, net_addr_union * n) -- convert IPv4/IPv6 Prefix PDU into net_addr_union

### Arguments

const struct pdu_header * pdu

  host byte order IPv4/IPv6 Prefix PDU

net_addr_union * n

  allocated net_addr_union for save ROA

### Description

This function reads ROA data from IPv4/IPv6 Prefix PDU and write them into net_addr_roa4 or net_addr_roa6 data structure.

### Function

void rpki_rx_packet (struct rpki_cache * cache, struct pdu_header * pdu) -- process a received RPKI PDU

### Arguments

struct rpki_cache * cache

  RPKI connection instance

struct pdu_header * pdu

  a RPKI PDU in network byte order

### Function

int rpki_send_error_pdu (struct rpki_cache * cache, const enum pdu_error_type error_code, u32 err_pdu_len, const struct pdu_header * erroneous_pdu, const char * fmt, ... ...) -- send RPKI Error PDU

### Arguments

struct rpki_cache * cache

  RPKI connection instance

const enum pdu_error_type error_code

  PDU Error type

u32 err_pdu_len

  length of erroneous_pdu

const struct pdu_header * erroneous_pdu

  optional network byte-order PDU that invokes Error by us or NULL

const char * fmt

  optional description text of error or NULL

... ...

  variable arguments

### Description

This function prepares Error PDU and sends it to a cache server.

### Function

ip_addr rpki_hostname_autoresolv (const char * host, const char ** err_msg) -- auto-resolve an IP address from a hostname

### Arguments

const char * host

  domain name of host, e.g. "rpki-validator.realmv6.org"

const char ** err_msg

  error message returned in case of errors

### Description

This function resolves an IP address from a hostname. Returns ip_addr structure with IP address or `IPA_NONE`.

### Function

int rpki_tr_open (struct rpki_tr_sock * tr) -- prepare and open a socket connection

### Arguments

struct rpki_tr_sock * tr

  initialized transport socket

### Description

Prepare and open a socket connection specified by tr that must be initialized before. This function ends with a calling the sk_open() function. Returns RPKI_TR_SUCCESS or RPKI_TR_ERROR.

### Function

void rpki_tr_close (struct rpki_tr_sock * tr) -- close socket and prepare it for possible next open

### Arguments

struct rpki_tr_sock * tr

  successfully opened transport socket

### Description

Close socket and free resources.

### Function

const char * rpki_tr_ident (struct rpki_tr_sock * tr) -- Returns a string identifier for the rpki transport socket

### Arguments

struct rpki_tr_sock * tr

  successfully opened transport socket

### Description

Returns a \0 terminated string identifier for the socket endpoint, e.g. "<host>:<port>". Memory is allocated inside tr structure.

### Function

void rpki_tr_tcp_init (struct rpki_tr_sock * tr) -- initializes the RPKI transport structure for a TCP connection

### Arguments

struct rpki_tr_sock * tr

  allocated RPKI transport structure

### Function

void rpki_tr_ssh_init (struct rpki_tr_sock * tr) -- initializes the RPKI transport structure for a SSH connection

### Arguments

struct rpki_tr_sock * tr

  allocated RPKI transport structure

## 5.10 Static

The Static protocol is implemented in a straightforward way. It keeps a list of static routes. Routes of dest RTD_UNICAST have associated sticky node in the neighbor cache to be notified about gaining or losing the neighbor and about interface-related events (e.g. link down). They may also have a BFD request if associated with a BFD session. When a route is notified, static_decide() is used to see whether the route activeness is changed. In such case, the route is marked as dirty and scheduled to be announced or withdrawn, which is done asynchronously from event hook. Routes of other types (e.g. black holes) are announced all the time.

Multipath routes are a bit tricky. To represent additional next hops, dummy static_route nodes are used, which are chained using mp_next field and link to the master node by mp_head field. Each next hop has a separate neighbor entry and an activeness state, but the master node is used for most purposes. Note that most functions DO NOT accept dummy nodes as arguments.

The only other thing worth mentioning is that when asked for reconfiguration, Static not only compares the two configurations, but it also calculates difference between the lists of static routes and it just inserts the newly added routes, removes the obsolete ones and reannounces changed ones.

## 5.11 Direct

The Direct protocol works by converting all ifa_notify() events it receives to rte_update() calls for the corresponding network.

Next Previous Contents