=> Bootstrap dependency digest>=20010302: found digest-20111104
=> Bootstrap dependency fetch-[0-9]*: found fetch-1.7
=> Checksum SHA1 OK for pilot-link-0.12.5.tar.bz2
=> Checksum RMD160 OK for pilot-link-0.12.5.tar.bz2
===> Installing dependencies for p5-pilot-link-0.12.5nb4
==========================================================================
The following variables will affect the build process of this package,
p5-pilot-link-0.12.5nb4.  Their current value is shown below:

        * CURSES_DEFAULT = ncurses

Based on these variables, the following variables have been set:

        * CURSES_TYPE = ncurses
        * TERMCAP_TYPE = curses

You may want to abort the process now with CTRL-C and change their value
before continuing.  Be sure to run `/usr/pkg/bin/bmake clean' after
the changes.
==========================================================================
=> Build dependency libtool-base>=2.2.6bnb3: found libtool-base-2.2.6bnb5
=> Build dependency checkperms>=1.1: found checkperms-1.11
=> Full dependency pilot-link-libs>=0.12.5: found pilot-link-libs-0.12.5
=> Full dependency png>=1.5.0: found png-1.5.8
=> Full dependency perl<5.16.0: found perl-5.14.2nb3
=> Full dependency perl>=5.14.0: found perl-5.14.2nb3
===> Overriding tools for p5-pilot-link-0.12.5nb4
===> Extracting for p5-pilot-link-0.12.5nb4
rm -f /tmp/pkgsrc/comms/p5-pilot-link/work/pilot-link-0.12.5/bindings/Perl/pm_to_blib
===> Patching for p5-pilot-link-0.12.5nb4
=> Applying pkgsrc patches for p5-pilot-link-0.12.5nb4
=> Trim programs to build
===> Creating toolchain wrappers for p5-pilot-link-0.12.5nb4
===> Configuring for p5-pilot-link-0.12.5nb4
=> Modifying GNU configure scripts to avoid --recheck
=> Replacing config-guess with pkgsrc versions
=> Replacing config-sub with pkgsrc versions
=> Replacing install-sh with pkgsrc version
=> Replacing Perl interpreter in bindings/Perl/h2xs-pilot-link bindings/Perl/dump.pl bindings/Perl/blib/lib/PDA/dump.pl.
=> Checking for portability problems in extracted files
configure: WARNING: unrecognized options: --with-cpp, --without-itcl, --without-perl5, --without-tk
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c -o pbulk -g pbulk
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /tmp/pkgsrc/comms/p5-pilot-link/work/.tools/bin/mkdir -p
checking for gawk... /usr/bin/awk
checking whether make sets $(MAKE)... yes
checking for x86_64-unknown-linux-gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for x86_64-unknown-linux-g77... f77
checking whether we are using the GNU Fortran 77 compiler... no
checking whether f77 accepts -g... no
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... (cached) /bin/grep
checking for egrep... (cached) /bin/egrep
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/x86_64-unknown-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-unknown-linux-gnu/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... (cached) 2097152
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/x86_64-unknown-linux-gnu/bin/ld option to reload object files... -r
checking for x86_64-unknown-linux-objdump... no
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-unknown-linux-ar... no
checking for ar... ar
checking for x86_64-unknown-linux-strip... no
checking for strip... strip
checking for x86_64-unknown-linux-ranlib... no
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for x86_64-unknown-linux-g77... (cached) f77
checking whether we are using the GNU Fortran 77 compiler... (cached) no
checking whether f77 accepts -g... (cached) no
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... /bin/rm: cannot remove `conftest*': No such file or directory
yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/x86_64-unknown-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... /bin/rm: cannot remove `conftest*': No such file or directory
no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for f77 option to produce PIC... 
checking if f77 static flag  works... no
checking if f77 supports -c -o file.o... /bin/rm: cannot remove `conftest*': No such file or directory
no
checking if f77 supports -c -o file.o... (cached) no
checking whether the f77 linker (/usr/x86_64-unknown-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for bison... no
checking for byacc... no
checking for ANSI C header files... (cached) yes
checking for an ANSI C-conforming const... yes
checking whether time.h and sys/time.h may both be included... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking whether gcc needs -traditional... no
checking return type of signal handlers... void
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for inttypes.h... (cached) yes
checking for memory.h... (cached) yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking regex.h usability... yes
checking regex.h presence... yes
checking for regex.h... yes
checking for stdint.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking sys/ioctl_compat.h usability... no
checking sys/ioctl_compat.h presence... no
checking for sys/ioctl_compat.h... no
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/malloc.h usability... no
checking sys/malloc.h presence... no
checking for sys/malloc.h... no
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/sockio.h usability... no
checking sys/sockio.h presence... no
checking for sys/sockio.h... no
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for unistd.h... (cached) yes
checking IOKit/IOBSD.h usability... no
checking IOKit/IOBSD.h presence... no
checking for IOKit/IOBSD.h... no
checking ifaddrs.h usability... yes
checking ifaddrs.h presence... yes
checking for ifaddrs.h... yes
checking for inttypes.h... (cached) yes
checking for atexit... yes
checking for cfmakeraw... yes
checking for cfsetispeed... yes
checking for cfsetospeed... yes
checking for cfsetspeed... yes
checking for dup2... yes
checking for gethostname... yes
checking for inet_aton... yes
checking for malloc... yes
checking for memcpy... yes
checking for memmove... yes
checking for putenv... yes
checking for sigaction... yes
checking for snprintf... yes
checking for strchr... yes
checking for strdup... yes
checking for strtok... yes
checking for strtoul... yes
checking for strerror... yes
checking for uname... yes
checking for connect... yes
checking for gethostbyname... yes
checking for main in -linet... no
checking for cispeed and cospeed members of struct termios... yes
checking for socklen_t... yes
checking whether to enable userland conduits... yes
checking for main in -lpng... yes
checking png.h usability... yes
checking png.h presence... yes
checking for png.h... yes
checking for png setjmp support... yes
checking for BLUEZ... no pkgconfig package
checking bluetooth/bluetooth.h usability... no
checking bluetooth/bluetooth.h presence... no
checking for bluetooth/bluetooth.h... no
checking for bluetooth/bluetooth.h... (cached) no
checking for bluetooth/bluetooth.h... (cached) no
checking popt.h usability... no
checking popt.h presence... no
checking for popt.h... no
checking whether to use included popt... yes
checking for libiconv in -liconv... no
checking for iconv... yes
checking for gnu_get_libc_version... yes
checking if system iconv handles CP1252... yes
checking for a readline compatible library... -lreadline
checking readline.h usability... no
checking readline.h presence... no
checking for readline.h... no
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking whether readline supports history... no
checking for perl version greater than or equal to 5.000_00... yes
Runtime debugging is enabled
configure: creating ./config.status
config.status: creating Makefile
config.status: creating pilot-link.m4
config.status: creating pilot-link.pc
config.status: creating pilot-link-pp.pc
config.status: creating libpisock/Makefile
config.status: creating libpisync/Makefile
config.status: creating include/Makefile
config.status: creating include/pi-version.h
config.status: creating popt/Makefile
config.status: creating src/Makefile
config.status: creating src/prc/Makefile
config.status: creating src/pix/Makefile
config.status: creating bindings/Makefile
config.status: creating bindings/Perl/Makefile.PL
config.status: creating bindings/Python/setup.py
config.status: creating bindings/Python/setup-standalone.py
config.status: creating bindings/Java/Makefile
config.status: creating bindings/Tcl/Makefile
config.status: creating doc/Makefile
config.status: creating doc/doxygen.cfg
config.status: creating doc/xml/Makefile
config.status: creating doc/xml/catalog.xml
config.status: creating doc/xml/docbook.xsl
config.status: creating doc/man/Makefile
config.status: creating tests/Makefile
config.status: creating darwin/Makefile
config.status: creating config.h
config.status: creating include/pi-md5.h
config.status: include/pi-md5.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
/bin/rm: cannot remove `libtoolT': No such file or directory
configure: WARNING: unrecognized options: --with-cpp, --without-itcl, --without-perl5, --without-tk

  Options detected/selected
  -------------------------.
  pilot-link version...... : 0.12.5
  libpisock version....... : 9.0.2
  libpisync version....... : 1.0.3
  Build for host.......... : x86_64-unknown-linux-gnu
  Extra Warnings.......... : no
  Direct USB support...... : yes, Linux
  BlueZ support........... : no
  Thread-safe libpisock... : no
  ElectricFence checks.... : no
  CPPFLAGS................ : -I/usr/pkg/include -I/usr/include -I/usr/pkg/include/ncurses
  CFLAGS.................. : -O3 -pipe -fstack-protector -I/usr/pkg/include -I/usr/include -I/usr/pkg/include/ncurses

  Userland Tools
  -------------------------.
  Build userland tools.... : yes
  Support for popt........ : yes (internal)
  Readline support........ : yes
  PNG support............. : yes

  Internal Language Support
  -------------------------.
  Iconv support........... : yes

  External Language Support
  -------------------------.
  TCL support............. : false	
  Java support............ : false	
  Python support.......... : false	
  Perl support............ : true	5.014002

=> Modifying libtool scripts to use pkgsrc libtool
WARNING: *** Please consider adding fortran to USE_LANGUAGES in the package Makefile.