/******************************************************************************
 * Project:  PROJ.4
 * Purpose:  Revised, experimental API for PROJ.4, intended as the foundation
 *           for added geodetic functionality.
 *
 *           The original proj API (defined previously in projects.h) has grown
 *           organically over the years, but it has also grown somewhat messy.
 *
 *           The same has happened with the newer high level API (defined in
 *           proj_api.h): To support various historical objectives, proj_api.h
 *           contains a rather complex combination of conditional defines and
 *           typedefs. Probably for good (historical) reasons, which are not
 *           always evident from today's perspective.
 *
 *           This is an evolving attempt at creating a re-rationalized API
 *           with primary design goals focused on sanitizing the namespaces.
 *           Hence, all symbols exposed are being moved to the proj_ namespace,
 *           while all data types are being moved to the PJ_ namespace.
 *
 *           Please note that this API is *orthogonal* to  the previous APIs:
 *           Apart from some inclusion guards, projects.h and proj_api.h are not
 *           touched - if you do not include proj.h, the projects and proj_api
 *           APIs should work as they always have.
 *
 *           A few implementation details:
 *
 *           Apart from the namespacing efforts, I'm trying to eliminate three
 *           proj_api elements, which I have found especially confusing.
 *
 *           FIRST and foremost, I try to avoid typedef'ing away pointer
 *           semantics. I agree that it can be occasionally useful, but I
 *           prefer having the pointer nature of function arguments being
 *           explicitly visible.
 *
 *           Hence, projCtx has been replaced by PJ_CONTEXT *.
 *           and    projPJ  has been replaced by PJ *
 *
 *           SECOND, I try to eliminate cases of information hiding implemented
 *           by redefining data types to void pointers.
 *
 *           I prefer using a combination of forward declarations and typedefs.
 *           Hence:
 *               typedef void *projCtx;
 *           Has been replaced by:
 *               struct projCtx_t;
 *               typedef struct projCtx_t PJ_CONTEXT;
 *           This makes it possible for the calling program to know that the
 *           PJ_CONTEXT data type exists, and handle pointers to that data type
 *           without having any idea about its internals.
 *
 *           (obviously, in this example, struct projCtx_t should also be
 *           renamed struct pj_ctx some day, but for backwards compatibility
 *           it remains as-is for now).
 *
 *           THIRD, I try to eliminate implicit type punning. Hence this API
 *           introduces the PJ_COORD union data type, for generic 4D coordinate
 *           handling.
 *
 *           PJ_COORD makes it possible to make explicit the previously used
 *           "implicit type punning", where a XY is turned into a LP by
 *           re#defining both as UV, behind the back of the user.
 *
 *           The PJ_COORD union is used for storing 1D, 2D, 3D and 4D
 *coordinates.
 *
 *           The bare essentials API presented here follows the PROJ.4
 *           convention of sailing the coordinate to be reprojected, up on
 *           the stack ("call by value"), and symmetrically returning the
 *           result on the stack. Although the PJ_COORD object is twice as large
 *           as the traditional XY and LP objects, timing results have shown the
 *           overhead to be very reasonable.
 *
 *           Contexts and thread safety
 *           --------------------------
 *
 *           After a year of experiments (and previous experience from the
 *           trlib transformation library) it has become clear that the
 *           context subsystem is unavoidable in a multi-threaded world.
 *           Hence, instead of hiding it away, we move it into the limelight,
 *           highly recommending (but not formally requiring) the bracketing
 *           of any code block calling PROJ.4 functions with calls to
 *           proj_context_create(...)/proj_context_destroy()
 *
 *           Legacy single threaded code need not do anything, but *may*
 *           implement a bit of future compatibility by using the backward
 *           compatible call proj_context_create(0), which will not create
 *           a new context, but simply provide a pointer to the default one.
 *
 *           See proj_4D_api_test.c for examples of how to use the API.
 *
 * Author:   Thomas Knudsen, <thokn@sdfe.dk>
 *           Benefitting from a large number of comments and suggestions
 *           by (primarily) Kristian Evers and Even Rouault.
 *
 ******************************************************************************
 * Copyright (c) 2016, 2017, Thomas Knudsen / SDFE
 * Copyright (c) 2018, Even Rouault
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO COORD SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
 * DEALINGS IN THE SOFTWARE.
 *****************************************************************************/

#ifndef PROJ_H
#define PROJ_H

#include <stddef.h> /* For size_t */

#ifdef ACCEPT_USE_OF_DEPRECATED_PROJ_API_H
#error "The proj_api.h header has been removed from PROJ with version 8.0.0"
#endif

#ifdef PROJ_RENAME_SYMBOLS
#include "proj_symbol_rename.h"
#endif

#ifdef __cplusplus
extern "C" {
#endif

/**
 * \file proj.h
 *
 * C API new generation
 */

/*! @cond Doxygen_Suppress */

#ifndef PROJ_DLL
#if defined(_MSC_VER)
#ifdef PROJ_MSVC_DLL_EXPORT
#define PROJ_DLL __declspec(dllexport)
#else
#define PROJ_DLL __declspec(dllimport)
#endif
#elif defined(__GNUC__)
#define PROJ_DLL __attribute__((visibility("default")))
#else
#define PROJ_DLL
#endif
#endif

#ifdef PROJ_SUPPRESS_DEPRECATION_MESSAGE
#define PROJ_DEPRECATED(decl, msg) decl
#elif defined(__has_extension)
#if __has_extension(attribute_deprecated_with_message)
#define PROJ_DEPRECATED(decl, msg) decl __attribute__((deprecated(msg)))
#elif defined(__GNUC__)
#define PROJ_DEPRECATED(decl, msg) decl __attribute__((deprecated))
#else
#define PROJ_DEPRECATED(decl, msg) decl
#endif
#elif defined(__GNUC__)
#define PROJ_DEPRECATED(decl, msg) decl __attribute__((deprecated))
#elif defined(_MSVC_VER)
#define PROJ_DEPRECATED(decl, msg) __declspec(deprecated(msg)) decl
#else
#define PROJ_DEPRECATED(decl, msg) decl
#endif

/* The version numbers should be updated with every release! **/
#define PROJ_VERSION_MAJOR 9
#define PROJ_VERSION_MINOR 8
#define PROJ_VERSION_PATCH 0

/* Note: the following 3 defines have been introduced in PROJ 8.0.1 */
/* Macro to compute a PROJ version number from its components */
#define PROJ_COMPUTE_VERSION(maj, min, patch)                                  \
    ((maj)*10000 + (min)*100 + (patch))

/* Current PROJ version from the above version numbers */
#define PROJ_VERSION_NUMBER                                                    \
    PROJ_COMPUTE_VERSION(PROJ_VERSION_MAJOR, PROJ_VERSION_MINOR,               \
                         PROJ_VERSION_PATCH)

/* Macro that returns true if the current PROJ version is at least the version
 * specified by (maj,min,patch) */
#define PROJ_AT_LEAST_VERSION(maj, min, patch)                                 \
    (PROJ_VERSION_NUMBER >= PROJ_COMPUTE_VERSION(maj, min, patch))

extern char const PROJ_DLL pj_release[]; /* global release id string */

/* first forward declare everything needed */

/* Data type for generic geodetic 3D data plus epoch information */
union PJ_COORD;
typedef union PJ_COORD PJ_COORD;

struct PJ_AREA;
typedef struct PJ_AREA PJ_AREA;

struct P5_FACTORS {          /* Common designation */
    double meridional_scale; /* h */
    double parallel_scale;   /* k */
    double areal_scale;      /* s */

    double angular_distortion;      /* omega */
    double meridian_parallel_angle; /* theta-prime */
    double meridian_convergence;    /* alpha */

    double tissot_semimajor; /* a */
    double tissot_semiminor; /* b */

    double dx_dlam, dx_dphi;
    double dy_dlam, dy_dphi;
};
typedef struct P5_FACTORS PJ_FACTORS;

/* Data type for projection/transformation information */
struct PJconsts;
typedef struct PJconsts PJ; /* the PJ object herself */

/* Data type for library level information */
struct PJ_INFO;
typedef struct PJ_INFO PJ_INFO;

struct PJ_PROJ_INFO;
typedef struct PJ_PROJ_INFO PJ_PROJ_INFO;

struct PJ_GRID_INFO;
typedef struct PJ_GRID_INFO PJ_GRID_INFO;

struct PJ_INIT_INFO;
typedef struct PJ_INIT_INFO PJ_INIT_INFO;

/* Data types for list of operations, ellipsoids, datums and units used in
 * PROJ.4 */
struct PJ_LIST {
    const char *id;           /* projection keyword */
    PJ *(*proj)(PJ *);        /* projection entry point */
    const char *const *descr; /* description text */
};

typedef struct PJ_LIST PJ_OPERATIONS;

struct PJ_ELLPS {
    const char *id;    /* ellipse keyword name */
    const char *major; /* a= value */
    const char *ell;   /* elliptical parameter */
    const char *name;  /* comments */
};
typedef struct PJ_ELLPS PJ_ELLPS;

struct PJ_UNITS {
    const char *id;       /* units keyword */
    const char *to_meter; /* multiply by value to get meters */
    const char *name;     /* comments */
    double factor;        /* to_meter factor in actual numbers */
};
typedef struct PJ_UNITS PJ_UNITS;

struct PJ_PRIME_MERIDIANS {
    const char *id;   /* prime meridian keyword */
    const char *defn; /* offset from greenwich in DMS format. */
};
typedef struct PJ_PRIME_MERIDIANS PJ_PRIME_MERIDIANS;

/* Geodetic, mostly spatiotemporal coordinate types */
typedef struct {
    double x, y, z, t;
} PJ_XYZT;
typedef struct {
    double u, v, w, t;
} PJ_UVWT;
typedef struct {
    double lam, phi, z, t;
} PJ_LPZT;
typedef struct {
    double o, p, k;
} PJ_OPK; /* Rotations: omega, phi, kappa */
typedef struct {
    double e, n, u;
} PJ_ENU; /* East, North, Up */
typedef struct {
    double s, a1, a2;
} PJ_GEOD; /* Geodesic length, fwd azi, rev azi */

/* Classic proj.4 pair/triplet types - moved into the PJ_ name space */
typedef struct {
    double u, v;
} PJ_UV;
typedef struct {
    double x, y;
} PJ_XY;
typedef struct {
    double lam, phi;
} PJ_LP;

typedef struct {
    double x, y, z;
} PJ_XYZ;
typedef struct {
    double u, v, w;
} PJ_UVW;
typedef struct {
    double lam, phi, z;
} PJ_LPZ;

/* Avoid preprocessor renaming and implicit type-punning: Use a union to make it
 * explicit */
union PJ_COORD {
    double v[4]; /* First and foremost, it really is "just 4 numbers in a
                    vector" */
    PJ_XYZT xyzt;
    PJ_UVWT uvwt;
    PJ_LPZT lpzt;
    PJ_GEOD geod;
    PJ_OPK opk;
    PJ_ENU enu;
    PJ_XYZ xyz;
    PJ_UVW uvw;
    PJ_LPZ lpz;
    PJ_XY xy;
    PJ_UV uv;
    PJ_LP lp;
};

struct PJ_INFO {
    int major;              /* Major release number                 */
    int minor;              /* Minor release number                 */
    int patch;              /* Patch level                          */
    const char *release;    /* Release info. Version + date         */
    const char *version;    /* Full version number                  */
    const char *searchpath; /* Paths where init and grid files are  */
                            /* looked for. Paths are separated by   */
                            /* semi-colons on Windows, and colons   */
                            /* on non-Windows platforms.            */
    const char *const *paths;
    size_t path_count;
};

struct PJ_PROJ_INFO {
    const char *id;          /* Name of the projection in question          */
    const char *description; /* Description of the projection */
    const char *definition;  /* Projection definition  */
    int has_inverse; /* 1 if an inverse mapping exists, 0 otherwise         */
    double
        accuracy; /* Expected accuracy of the transformation. -1 if unknown.  */
};

struct PJ_GRID_INFO {
    char gridname[32];     /* name of grid                         */
    char filename[260];    /* full path to grid                    */
    char format[8];        /* file format of grid                  */
    PJ_LP lowerleft;       /* Coordinates of lower left corner     */
    PJ_LP upperright;      /* Coordinates of upper right corner    */
    int n_lon, n_lat;      /* Grid size                            */
    double cs_lon, cs_lat; /* Cell size of grid                    */
};

struct PJ_INIT_INFO {
    char name[32];       /* name of init file                        */
    char filename[260];  /* full path to the init file.              */
    char version[32];    /* version of the init file                 */
    char origin[32];     /* origin of the file, e.g. EPSG            */
    char lastupdate[16]; /* Date of last update in YYYY-MM-DD format */
};

typedef enum PJ_LOG_LEVEL {
    PJ_LOG_NONE = 0,
    PJ_LOG_ERROR = 1,
    PJ_LOG_DEBUG = 2,
    PJ_LOG_TRACE = 3,
    PJ_LOG_TELL = 4,
    PJ_LOG_DEBUG_MAJOR = 2, /* for proj_api.h compatibility */
    PJ_LOG_DEBUG_MINOR = 3  /* for proj_api.h compatibility */
} PJ_LOG_LEVEL;

typedef void (*PJ_LOG_FUNCTION)(void *, int, const char *);

/* The context type - properly namespaced synonym for pj_ctx */
struct pj_ctx;
typedef struct pj_ctx PJ_CONTEXT;

/* A P I */

/**
 * The objects returned by the functions defined in this section have minimal
 * interaction with the functions of the
 * \ref iso19111_functions section, and vice versa. See its introduction
 * paragraph for more details.
 */

/* Functionality for handling thread contexts */
#ifdef __cplusplus
#define PJ_DEFAULT_CTX nullptr
#else
#define PJ_DEFAULT_CTX 0
#endif
PJ_CONTEXT PROJ_DLL *proj_context_create(void);
PJ_CONTEXT PROJ_DLL *proj_context_destroy(PJ_CONTEXT *ctx);
PJ_CONTEXT PROJ_DLL *proj_context_clone(PJ_CONTEXT *ctx);

/** Callback to resolve a filename to a full path */
typedef const char *(*proj_file_finder)(PJ_CONTEXT *ctx, const char *,
                                        void *user_data);
/*! @endcond */

void PROJ_DLL proj_context_set_file_finder(PJ_CONTEXT *ctx,
                                           proj_file_finder finder,
                                           void *user_data);
void PROJ_DLL proj_context_set_search_paths(PJ_CONTEXT *ctx, int count_paths,
                                            const char *const *paths);
void PROJ_DLL proj_context_set_ca_bundle_path(PJ_CONTEXT *ctx,
                                              const char *path);
/*! @cond Doxygen_Suppress */
void PROJ_DLL proj_context_use_proj4_init_rules(PJ_CONTEXT *ctx, int enable);
int PROJ_DLL proj_context_get_use_proj4_init_rules(PJ_CONTEXT *ctx,
                                                   int from_legacy_code_path);

/*! @endcond */

/** Opaque structure for PROJ for a file handle. Implementations might cast it
 * to their structure/class of choice. */
typedef struct PROJ_FILE_HANDLE PROJ_FILE_HANDLE;

/** Open access / mode */
typedef enum PROJ_OPEN_ACCESS {
    /** Read-only access. Equivalent to "rb" */
    PROJ_OPEN_ACCESS_READ_ONLY,

    /** Read-update access. File should be created if not existing. Equivalent
       to "r+b" */
    PROJ_OPEN_ACCESS_READ_UPDATE,

    /** Create access. File should be truncated to 0-byte if already existing.
       Equivalent to "w+b" */
    PROJ_OPEN_ACCESS_CREATE
} PROJ_OPEN_ACCESS;

/** File API callbacks */
typedef struct PROJ_FILE_API {
    /** Version of this structure. Should be set to 1 currently. */
    int version;

    /** Open file. Return NULL if error */
    PROJ_FILE_HANDLE *(*open_cbk)(PJ_CONTEXT *ctx, const char *filename,
                                  PROJ_OPEN_ACCESS access, void *user_data);

    /** Read sizeBytes into buffer from current position and return number of
     * bytes read */
    size_t (*read_cbk)(PJ_CONTEXT *ctx, PROJ_FILE_HANDLE *, void *buffer,
                       size_t sizeBytes, void *user_data);

    /** Write sizeBytes into buffer from current position and return number of
     * bytes written */
    size_t (*write_cbk)(PJ_CONTEXT *ctx, PROJ_FILE_HANDLE *, const void *buffer,
                        size_t sizeBytes, void *user_data);

    /** Seek to offset using whence=SEEK_SET/SEEK_CUR/SEEK_END. Return TRUE in
     * case of success */
    int (*seek_cbk)(PJ_CONTEXT *ctx, PROJ_FILE_HANDLE *, long long offset,
                    int whence, void *user_data);

    /** Return current file position */
    unsigned long long (*tell_cbk)(PJ_CONTEXT *ctx, PROJ_FILE_HANDLE *,
                                   void *user_data);

    /** Close file */
    void (*close_cbk)(PJ_CONTEXT *ctx, PROJ_FILE_HANDLE *, void *user_data);

    /** Return TRUE if a file exists */
    int (*exists_cbk)(PJ_CONTEXT *ctx, const char *filename, void *user_data);

    /** Return TRUE if directory exists or could be created  */
    int (*mkdir_cbk)(PJ_CONTEXT *ctx, const char *filename, void *user_data);

    /** Return TRUE if file could be removed  */
    int (*unlink_cbk)(PJ_CONTEXT *ctx, const char *filename, void *user_data);

    /** Return TRUE if file could be renamed  */
    int (*rename_cbk)(PJ_CONTEXT *ctx, const char *oldPath, const char *newPath,
                      void *user_data);
} PROJ_FILE_API;

int PROJ_DLL proj_context_set_fileapi(PJ_CONTEXT *ctx,
                                      const PROJ_FILE_API *fileapi,
                                      void *user_data);

void PROJ_DLL proj_context_set_sqlite3_vfs_name(PJ_CONTEXT *ctx,
                                                const char *name);

/** Opaque structure for PROJ for a network handle. Implementations might cast
 * it to their structure/class of choice. */
typedef struct PROJ_NETWORK_HANDLE PROJ_NETWORK_HANDLE;

/** Network access: open callback
 *
 * Should try to read the size_to_read first bytes at the specified offset of
 * the file given by URL url,
 * and write them to buffer. *out_size_read should be updated with the actual
 * amount of bytes read (== size_to_read if the file is larger than
 * size_to_read). During this read, the implementation should make sure to store
 * the HTTP headers from the server response to be able to respond to
 * proj_network_get_header_value_cbk_type callback.
 *
 * error_string_max_size should be the maximum size that can be written into
 * the out_error_string buffer (including terminating nul character).
 *
 * @return a non-NULL opaque handle in case of success.
 */
typedef PROJ_NETWORK_HANDLE *(*proj_network_open_cbk_type)(
    PJ_CONTEXT *ctx, const char *url, unsigned long long offset,
    size_t size_to_read, void *buffer, size_t *out_size_read,
    size_t error_string_max_size, char *out_error_string, void *user_data);

/** Network access: close callback */
typedef void (*proj_network_close_cbk_type)(PJ_CONTEXT *ctx,
                                            PROJ_NETWORK_HANDLE *handle,
                                            void *user_data);

/** Network access: get HTTP headers */
typedef const char *(*proj_network_get_header_value_cbk_type)(
    PJ_CONTEXT *ctx, PROJ_NETWORK_HANDLE *handle, const char *header_name,
    void *user_data);

/** Network access: read range
 *
 * Read size_to_read bytes from handle, starting at offset, into
 * buffer.
 * During this read, the implementation should make sure to store the HTTP
 * headers from the server response to be able to respond to
 * proj_network_get_header_value_cbk_type callback.
 *
 * error_string_max_size should be the maximum size that can be written into
 * the out_error_string buffer (including terminating nul character).
 *
 * @return the number of bytes actually read (0 in case of error)
 */
typedef size_t (*proj_network_read_range_type)(
    PJ_CONTEXT *ctx, PROJ_NETWORK_HANDLE *handle, unsigned long long offset,
    size_t size_to_read, void *buffer, size_t error_string_max_size,
    char *out_error_string, void *user_data);

int PROJ_DLL proj_context_set_network_callbacks(
    PJ_CONTEXT *ctx, proj_network_open_cbk_type open_cbk,
    proj_network_close_cbk_type close_cbk,
    proj_network_get_header_value_cbk_type get_header_value_cbk,
    proj_network_read_range_type read_range_cbk, void *user_data);

int PROJ_DLL proj_context_set_enable_network(PJ_CONTEXT *ctx, int enabled);

int PROJ_DLL proj_context_is_network_enabled(PJ_CONTEXT *ctx);

void PROJ_DLL proj_context_set_url_endpoint(PJ_CONTEXT *ctx, const char *url);

const char PROJ_DLL *proj_context_get_url_endpoint(PJ_CONTEXT *ctx);

const char PROJ_DLL *proj_context_get_user_writable_directory(PJ_CONTEXT *ctx,
                                                              int create);

void PROJ_DLL proj_context_set_user_writable_directory(PJ_CONTEXT *ctx,
                                                       const char *path,
                                                       int create);

void PROJ_DLL proj_grid_cache_set_enable(PJ_CONTEXT *ctx, int enabled);

void PROJ_DLL proj_grid_cache_set_filename(PJ_CONTEXT *ctx,
                                           const char *fullname);

void PROJ_DLL proj_grid_cache_set_max_size(PJ_CONTEXT *ctx, int max_size_MB);

void PROJ_DLL proj_grid_cache_set_ttl(PJ_CONTEXT *ctx, int ttl_seconds);

void PROJ_DLL proj_grid_cache_clear(PJ_CONTEXT *ctx);

int PROJ_DLL proj_is_download_needed(PJ_CONTEXT *ctx,
                                     const char *url_or_filename,
                                     int ignore_ttl_setting);
int PROJ_DLL proj_download_file(PJ_CONTEXT *ctx, const char *url_or_filename,
                                int ignore_ttl_setting,
                                int (*progress_cbk)(PJ_CONTEXT *, double pct,
                                                    void *user_data),
                                void *user_data);

/*! @cond Doxygen_Suppress */

/* Manage the transformation definition object PJ */
PJ PROJ_DLL *proj_create(PJ_CONTEXT *ctx, const char *definition);
PJ PROJ_DLL *proj_create_argv(PJ_CONTEXT *ctx, int argc, char **argv);
PJ PROJ_DLL *proj_create_crs_to_crs(PJ_CONTEXT *ctx, const char *source_crs,
                                    const char *target_crs, PJ_AREA *area);
PJ PROJ_DLL *proj_create_crs_to_crs_from_pj(PJ_CONTEXT *ctx,
                                            const PJ *source_crs,
                                            const PJ *target_crs, PJ_AREA *area,
                                            const char *const *options);
/*! @endcond */
PJ PROJ_DLL *proj_normalize_for_visualization(PJ_CONTEXT *ctx, const PJ *obj);
/*! @cond Doxygen_Suppress */
void PROJ_DLL proj_assign_context(PJ *pj, PJ_CONTEXT *ctx);
PJ PROJ_DLL *proj_destroy(PJ *P);

PJ_AREA PROJ_DLL *proj_area_create(void);
void PROJ_DLL proj_area_set_bbox(PJ_AREA *area, double west_lon_degree,
                                 double south_lat_degree,
                                 double east_lon_degree,
                                 double north_lat_degree);
void PROJ_DLL proj_area_set_name(PJ_AREA *area, const char *name);
void PROJ_DLL proj_area_destroy(PJ_AREA *area);

/* Apply transformation to observation - in forward or inverse direction */
enum PJ_DIRECTION {
    PJ_FWD = 1,   /* Forward    */
    PJ_IDENT = 0, /* Do nothing */
    PJ_INV = -1   /* Inverse    */
};
typedef enum PJ_DIRECTION PJ_DIRECTION;

int PROJ_DLL proj_angular_input(PJ *P, enum PJ_DIRECTION dir);
int PROJ_DLL proj_angular_output(PJ *P, enum PJ_DIRECTION dir);

int PROJ_DLL proj_degree_input(PJ *P, enum PJ_DIRECTION dir);
int PROJ_DLL proj_degree_output(PJ *P, enum PJ_DIRECTION dir);

PJ_COORD PROJ_DLL proj_trans(PJ *P, PJ_DIRECTION direction, PJ_COORD coord);
PJ PROJ_DLL *proj_trans_get_last_used_operation(PJ *P);
int PROJ_DLL proj_trans_array(PJ *P, PJ_DIRECTION direction, size_t n,
                              PJ_COORD *coord);
size_t PROJ_DLL proj_trans_generic(PJ *P, PJ_DIRECTION direction, double *x,
                                   size_t sx, size_t nx, double *y, size_t sy,
                                   size_t ny, double *z, size_t sz, size_t nz,
                                   double *t, size_t st, size_t nt);
/*! @endcond */
int PROJ_DLL proj_trans_bounds(PJ_CONTEXT *context, PJ *P,
                               PJ_DIRECTION direction, double xmin, double ymin,
                               double xmax, double ymax, double *out_xmin,
                               double *out_ymin, double *out_xmax,
                               double *out_ymax, int densify_pts);

int PROJ_DLL proj_trans_bounds_3D(PJ_CONTEXT *context, PJ *P,
                                  PJ_DIRECTION direction, const double xmin,
                                  const double ymin, const double zmin,
                                  const double xmax, const double ymax,
                                  const double zmax, double *out_xmin,
                                  double *out_ymin, double *out_zmin,
                                  double *out_xmax, double *out_ymax,
                                  double *out_zmax, const int densify_pts);

/*! @cond Doxygen_Suppress */

/* Initializers */
PJ_COORD PROJ_DLL proj_coord(double x, double y, double z, double t);

/* Measure internal consistency - in forward or inverse direction */
double PROJ_DLL proj_roundtrip(PJ *P, PJ_DIRECTION direction, int n,
                               PJ_COORD *coord);

/* Geodesic distance between two points with angular 2D coordinates */
double PROJ_DLL proj_lp_dist(const PJ *P, PJ_COORD a, PJ_COORD b);

/* The geodesic distance AND the vertical offset */
double PROJ_DLL proj_lpz_dist(const PJ *P, PJ_COORD a, PJ_COORD b);

/* Euclidean distance between two points with linear 2D coordinates */
double PROJ_DLL proj_xy_dist(PJ_COORD a, PJ_COORD b);

/* Euclidean distance between two points with linear 3D coordinates */
double PROJ_DLL proj_xyz_dist(PJ_COORD a, PJ_COORD b);

/* Geodesic distance (in meter) + fwd and rev azimuth between two points on the
 * ellipsoid */
PJ_COORD PROJ_DLL proj_geod(const PJ *P, PJ_COORD a, PJ_COORD b);

/**
 * @brief Solves the direct geodesic problem for given projection ellipsoid
 *
 * @param P
 *      Transformation or CRS object
 *
 * @param a
 *      Coordinate of first point. The coordinates needs to be given as
 * longitude and latitude in radians. Note that the axis order of the `P` object
 * is not taken into account in this function, so even though a CRS object comes
 * with axis ordering latitude/longitude coordinates used in this function
 * should be reordered as longitude latitude.
 *
 * @param azimuth
 *      Initial azimuth from first point to second point in radians, measured
 *      clockwise from true north
 *
 * @param distance
 *      Geodesic distance from the starting point to the destination, in meters
 *
 * @return
 *      `PJ_COORD` where the first value is the longitude in radians, second
 * value is latitude in radians and third value is forward azimuth at second
 * point in radians. The fourth coordinate value is unused.
 *
 * @see proj_geod() for solving the inverse geodesic problem.
 */
PJ_COORD PROJ_DLL proj_geod_direct(const PJ *P, PJ_COORD a, double azimuth,
                                   double distance);

/* PROJ error codes */

/** Error codes typically related to coordinate operation initialization
 * Note: some of them can also be emitted during coordinate transformation,
 * like PROJ_ERR_INVALID_OP_FILE_NOT_FOUND_OR_INVALID in case the resource
 * loading is deferred until it is really needed.
 */
#define PROJ_ERR_INVALID_OP                                                    \
    1024 /* other/unspecified error related to coordinate operation            \
            initialization */
#define PROJ_ERR_INVALID_OP_WRONG_SYNTAX                                       \
    (PROJ_ERR_INVALID_OP +                                                     \
     1) /* invalid pipeline structure, missing +proj argument, etc */
#define PROJ_ERR_INVALID_OP_MISSING_ARG                                        \
    (PROJ_ERR_INVALID_OP + 2) /* missing required operation parameter */
#define PROJ_ERR_INVALID_OP_ILLEGAL_ARG_VALUE                                  \
    (PROJ_ERR_INVALID_OP +                                                     \
     3) /* one of the operation parameter has an illegal value */
#define PROJ_ERR_INVALID_OP_MUTUALLY_EXCLUSIVE_ARGS                            \
    (PROJ_ERR_INVALID_OP + 4) /* mutually exclusive arguments */
#define PROJ_ERR_INVALID_OP_FILE_NOT_FOUND_OR_INVALID                          \
    (PROJ_ERR_INVALID_OP + 5) /* file not found (particular case of            \
                                 PROJ_ERR_INVALID_OP_ILLEGAL_ARG_VALUE) */

/** Error codes related to transformation on a specific coordinate */
#define PROJ_ERR_COORD_TRANSFM                                                 \
    2048 /* other error related to coordinate transformation */
#define PROJ_ERR_COORD_TRANSFM_INVALID_COORD                                   \
    (PROJ_ERR_COORD_TRANSFM + 1) /* for e.g lat > 90deg */
#define PROJ_ERR_COORD_TRANSFM_OUTSIDE_PROJECTION_DOMAIN                       \
    (PROJ_ERR_COORD_TRANSFM +                                                  \
     2) /* coordinate is outside of the projection domain. e.g approximate     \
           mercator with |longitude - lon_0| > 90deg, or iterative convergence \
           method failed */
#define PROJ_ERR_COORD_TRANSFM_NO_OPERATION                                    \
    (PROJ_ERR_COORD_TRANSFM +                                                  \
     3) /* no operation found, e.g if no match the required accuracy, or if    \
           ballpark transformations were asked to not be used and they would   \
           be only such candidate */
#define PROJ_ERR_COORD_TRANSFM_OUTSIDE_GRID                                    \
    (PROJ_ERR_COORD_TRANSFM +                                                  \
     4) /* point to transform falls outside grid or subgrid */
#define PROJ_ERR_COORD_TRANSFM_GRID_AT_NODATA                                  \
    (PROJ_ERR_COORD_TRANSFM +                                                  \
     5) /* point to transform falls in a grid cell that evaluates to nodata */
#define PROJ_ERR_COORD_TRANSFM_NO_CONVERGENCE                                  \
    (PROJ_ERR_COORD_TRANSFM + 6) /* iterative convergence method fail */
#define PROJ_ERR_COORD_TRANSFM_MISSING_TIME                                    \
    (PROJ_ERR_COORD_TRANSFM + 7) /* operation requires time, but not provided  \
                                  */

/** Other type of errors */
#define PROJ_ERR_OTHER 4096
#define PROJ_ERR_OTHER_API_MISUSE                                              \
    (PROJ_ERR_OTHER + 1) /* error related to a misuse of PROJ API */
#define PROJ_ERR_OTHER_NO_INVERSE_OP                                           \
    (PROJ_ERR_OTHER + 2) /* no inverse method available */
#define PROJ_ERR_OTHER_NETWORK_ERROR                                           \
    (PROJ_ERR_OTHER + 3) /* failure when accessing a network resource */

/* Set or read error level */
int PROJ_DLL proj_context_errno(PJ_CONTEXT *ctx);
int PROJ_DLL proj_errno(const PJ *P);
int PROJ_DLL proj_errno_set(const PJ *P, int err);
int PROJ_DLL proj_errno_reset(const PJ *P);
int PROJ_DLL proj_errno_restore(const PJ *P, int err);
const char PROJ_DLL *
proj_errno_string(int err); /* deprecated. use proj_context_errno_string() */
const char PROJ_DLL *proj_context_errno_string(PJ_CONTEXT *ctx, int err);

PJ_LOG_LEVEL PROJ_DLL proj_log_level(PJ_CONTEXT *ctx, PJ_LOG_LEVEL log_level);
void PROJ_DLL proj_log_func(PJ_CONTEXT *ctx, void *app_data,
                            PJ_LOG_FUNCTION logf);

/* Scaling and angular distortion factors */
PJ_FACTORS PROJ_DLL proj_factors(PJ *P, PJ_COORD lp);

/* Info functions - get information about various PROJ.4 entities */
PJ_INFO PROJ_DLL proj_info(void);
PJ_PROJ_INFO PROJ_DLL proj_pj_info(PJ *P);
PJ_GRID_INFO PROJ_DLL proj_grid_info(const char *gridname);
PJ_INIT_INFO PROJ_DLL proj_init_info(const char *initname);

/* List functions: */
/* Get lists of operations, ellipsoids, units and prime meridians. */
const PJ_OPERATIONS PROJ_DLL *proj_list_operations(void);
const PJ_ELLPS PROJ_DLL *proj_list_ellps(void);
PROJ_DEPRECATED(const PJ_UNITS PROJ_DLL *proj_list_units(void),
                "Deprecated by proj_get_units_from_database");
PROJ_DEPRECATED(const PJ_UNITS PROJ_DLL *proj_list_angular_units(void),
                "Deprecated by proj_get_units_from_database");
const PJ_PRIME_MERIDIANS PROJ_DLL *proj_list_prime_meridians(void);

/* These are trivial, and while occasionally useful in real code, primarily here
 * to      */
/* simplify demo code, and in acknowledgement of the proj-internal discrepancy
 * between   */
/* angular units expected by classical proj, and by Charles Karney's geodesics
 * subsystem */
double PROJ_DLL proj_torad(double angle_in_degrees);
double PROJ_DLL proj_todeg(double angle_in_radians);

double PROJ_DLL proj_dmstor(const char *is, char **rs);
PROJ_DEPRECATED(char PROJ_DLL *proj_rtodms(char *s, double r, int pos, int neg),
                "Deprecated by proj_rtodms2");
char PROJ_DLL *proj_rtodms2(char *s, size_t sizeof_s, double r, int pos,
                            int neg);

void PROJ_DLL proj_cleanup(void);

/*! @endcond */

/* ------------------------------------------------------------------------- */
/* Binding in C of C++ API */
/* ------------------------------------------------------------------------- */

/** @defgroup iso19111_types Data types for ISO19111 C API
 *  Data types for ISO19111 C API
 *  @{
 */

/** \brief Type representing a NULL terminated list of NULL-terminate strings.
 */
typedef char **PROJ_STRING_LIST;

/** \brief Guessed WKT "dialect". */
typedef enum {
    /** \ref WKT2_2019 */
    PJ_GUESSED_WKT2_2019,

    /** Deprecated alias for PJ_GUESSED_WKT2_2019 */
    PJ_GUESSED_WKT2_2018 = PJ_GUESSED_WKT2_2019,

    /** \ref WKT2_2015 */
    PJ_GUESSED_WKT2_2015,

    /** \ref WKT1 */
    PJ_GUESSED_WKT1_GDAL,

    /** ESRI variant of WKT1 */
    PJ_GUESSED_WKT1_ESRI,

    /** Not WKT / unrecognized */
    PJ_GUESSED_NOT_WKT
} PJ_GUESSED_WKT_DIALECT;

/** \brief Object category. */
typedef enum {
    PJ_CATEGORY_ELLIPSOID,
    PJ_CATEGORY_PRIME_MERIDIAN,
    PJ_CATEGORY_DATUM,
    PJ_CATEGORY_CRS,
    PJ_CATEGORY_COORDINATE_OPERATION,
    PJ_CATEGORY_DATUM_ENSEMBLE
} PJ_CATEGORY;

/** \brief Object type. */
typedef enum {
    PJ_TYPE_UNKNOWN,

    PJ_TYPE_ELLIPSOID,

    PJ_TYPE_PRIME_MERIDIAN,

    PJ_TYPE_GEODETIC_REFERENCE_FRAME,
    PJ_TYPE_DYNAMIC_GEODETIC_REFERENCE_FRAME,
    PJ_TYPE_VERTICAL_REFERENCE_FRAME,
    PJ_TYPE_DYNAMIC_VERTICAL_REFERENCE_FRAME,
    PJ_TYPE_DATUM_ENSEMBLE,

    /** Abstract type, not returned by proj_get_type() */
    PJ_TYPE_CRS,

    PJ_TYPE_GEODETIC_CRS,
    PJ_TYPE_GEOCENTRIC_CRS,

    /** proj_get_type() will never return that type, but
     * PJ_TYPE_GEOGRAPHIC_2D_CRS or PJ_TYPE_GEOGRAPHIC_3D_CRS. */
    PJ_TYPE_GEOGRAPHIC_CRS,

    PJ_TYPE_GEOGRAPHIC_2D_CRS,
    PJ_TYPE_GEOGRAPHIC_3D_CRS,
    PJ_TYPE_VERTICAL_CRS,
    PJ_TYPE_PROJECTED_CRS,
    PJ_TYPE_COMPOUND_CRS,
    PJ_TYPE_TEMPORAL_CRS,
    PJ_TYPE_ENGINEERING_CRS,
    PJ_TYPE_BOUND_CRS,
    PJ_TYPE_OTHER_CRS,

    PJ_TYPE_CONVERSION,
    PJ_TYPE_TRANSFORMATION,
    PJ_TYPE_CONCATENATED_OPERATION,
    PJ_TYPE_OTHER_COORDINATE_OPERATION,

    PJ_TYPE_TEMPORAL_DATUM,
    PJ_TYPE_ENGINEERING_DATUM,
    PJ_TYPE_PARAMETRIC_DATUM,

    PJ_TYPE_DERIVED_PROJECTED_CRS,

    PJ_TYPE_COORDINATE_METADATA,
} PJ_TYPE;

/** Comparison criterion. */
typedef enum {
    /** All properties are identical. */
    PJ_COMP_STRICT,

    /** The objects are equivalent for the purpose of coordinate
     * operations. They can differ by the name of their objects,
     * identifiers, other metadata.
     * Parameters may be expressed in different units, provided that the
     * value is (with some tolerance) the same once expressed in a
     * common unit.
     */
    PJ_COMP_EQUIVALENT,

    /** Same as EQUIVALENT, relaxed with an exception that the axis order
     * of the base CRS of a DerivedCRS/ProjectedCRS or the axis order of
     * a GeographicCRS is ignored. Only to be used
     * with DerivedCRS/ProjectedCRS/GeographicCRS */
    PJ_COMP_EQUIVALENT_EXCEPT_AXIS_ORDER_GEOGCRS,
} PJ_COMPARISON_CRITERION;

/** \brief WKT version. */
typedef enum {
    /** cf osgeo::proj::io::WKTFormatter::Convention::WKT2 */
    PJ_WKT2_2015,
    /** cf osgeo::proj::io::WKTFormatter::Convention::WKT2_SIMPLIFIED */
    PJ_WKT2_2015_SIMPLIFIED,
    /** cf osgeo::proj::io::WKTFormatter::Convention::WKT2_2019 */
    PJ_WKT2_2019,
    /** Deprecated alias for PJ_WKT2_2019 */
    PJ_WKT2_2018 = PJ_WKT2_2019,
    /** cf osgeo::proj::io::WKTFormatter::Convention::WKT2_2019_SIMPLIFIED */
    PJ_WKT2_2019_SIMPLIFIED,
    /** Deprecated alias for PJ_WKT2_2019 */
    PJ_WKT2_2018_SIMPLIFIED = PJ_WKT2_2019_SIMPLIFIED,
    /** cf osgeo::proj::io::WKTFormatter::Convention::WKT1_GDAL */
    PJ_WKT1_GDAL,
    /** cf osgeo::proj::io::WKTFormatter::Convention::WKT1_ESRI */
    PJ_WKT1_ESRI
} PJ_WKT_TYPE;

/** Specify how source and target CRS extent should be used to restrict
 * candidate operations (only taken into account if no explicit area of
 * interest is specified. */
typedef enum {
    /** Ignore CRS extent */
    PJ_CRS_EXTENT_NONE,

    /** Test coordinate operation extent against both CRS extent. */
    PJ_CRS_EXTENT_BOTH,

    /** Test coordinate operation extent against the intersection of both
        CRS extent. */
    PJ_CRS_EXTENT_INTERSECTION,

    /** Test coordinate operation against the smallest of both CRS extent. */
    PJ_CRS_EXTENT_SMALLEST
} PROJ_CRS_EXTENT_USE;

/** Describe how grid availability is used. */
typedef enum {
    /** Grid availability is only used for sorting results. Operations
     * where some grids are missing will be sorted last. */
    PROJ_GRID_AVAILABILITY_USED_FOR_SORTING,

    /** Completely discard an operation if a required grid is missing. */
    PROJ_GRID_AVAILABILITY_DISCARD_OPERATION_IF_MISSING_GRID,

    /** Ignore grid availability at all. Results will be presented as if
     * all grids were available. */
    PROJ_GRID_AVAILABILITY_IGNORED,

    /** Results will be presented as if grids known to PROJ (that is
     * registered in the grid_alternatives table of its database) were
     * available. Used typically when networking is enabled.
     */
    PROJ_GRID_AVAILABILITY_KNOWN_AVAILABLE,
} PROJ_GRID_AVAILABILITY_USE;

/** \brief PROJ string version. */
typedef enum {
    /** cf osgeo::proj::io::PROJStringFormatter::Convention::PROJ_5 */
    PJ_PROJ_5,
    /** cf osgeo::proj::io::PROJStringFormatter::Convention::PROJ_4 */
    PJ_PROJ_4
} PJ_PROJ_STRING_TYPE;

/** Spatial criterion to restrict candidate operations. */
typedef enum {
    /** The area of validity of transforms should strictly contain the
     * are of interest. */
    PROJ_SPATIAL_CRITERION_STRICT_CONTAINMENT,

    /** The area of validity of transforms should at least intersect the
     * area of interest. */
    PROJ_SPATIAL_CRITERION_PARTIAL_INTERSECTION
} PROJ_SPATIAL_CRITERION;

/** Describe if and how intermediate CRS should be used */
typedef enum {
    /** Always search for intermediate CRS. */
    PROJ_INTERMEDIATE_CRS_USE_ALWAYS,

    /** Only attempt looking for intermediate CRS if there is no direct
     * transformation available. */
    PROJ_INTERMEDIATE_CRS_USE_IF_NO_DIRECT_TRANSFORMATION,

    /* Do not attempt looking for intermediate CRS. */
    PROJ_INTERMEDIATE_CRS_USE_NEVER,
} PROJ_INTERMEDIATE_CRS_USE;

/** Type of coordinate system. */
typedef enum {
    PJ_CS_TYPE_UNKNOWN,

    PJ_CS_TYPE_CARTESIAN,
    PJ_CS_TYPE_ELLIPSOIDAL,
    PJ_CS_TYPE_VERTICAL,
    PJ_CS_TYPE_SPHERICAL,
    PJ_CS_TYPE_ORDINAL,
    PJ_CS_TYPE_PARAMETRIC,
    PJ_CS_TYPE_DATETIMETEMPORAL,
    PJ_CS_TYPE_TEMPORALCOUNT,
    PJ_CS_TYPE_TEMPORALMEASURE
} PJ_COORDINATE_SYSTEM_TYPE;

/** \brief Structure given overall description of a CRS.
 *
 * This structure may grow over time, and should not be directly allocated by
 * client code.
 */
typedef struct {
    /** Authority name. */
    char *auth_name;
    /** Object code. */
    char *code;
    /** Object name. */
    char *name;
    /** Object type. */
    PJ_TYPE type;
    /** Whether the object is deprecated */
    int deprecated;
    /** Whereas the west_lon_degree, south_lat_degree, east_lon_degree and
     * north_lat_degree fields are valid. */
    int bbox_valid;
    /** Western-most longitude of the area of use, in degrees. */
    double west_lon_degree;
    /** Southern-most latitude of the area of use, in degrees. */
    double south_lat_degree;
    /** Eastern-most longitude of the area of use, in degrees. */
    double east_lon_degree;
    /** Northern-most latitude of the area of use, in degrees. */
    double north_lat_degree;
    /** Name of the area of use. */
    char *area_name;
    /** Name of the projection method for a projected CRS. Might be NULL even
     *for projected CRS in some cases. */
    char *projection_method_name;

    /** Name of the celestial body of the CRS (e.g. "Earth").
     * @since 8.1
     */
    char *celestial_body_name;
} PROJ_CRS_INFO;

/** \brief Structure describing optional parameters for proj_get_crs_list();
 *
 * This structure may grow over time, and should not be directly allocated by
 * client code.
 */
typedef struct {
    /** Array of allowed object types. Should be NULL if all types are allowed*/
    const PJ_TYPE *types;
    /** Size of types. Should be 0 if all types are allowed*/
    size_t typesCount;

    /** If TRUE and bbox_valid == TRUE, then only CRS whose area of use
     * entirely contains the specified bounding box will be returned.
     * If FALSE and bbox_valid == TRUE, then only CRS whose area of use
     * intersects the specified bounding box will be returned.
     */
    int crs_area_of_use_contains_bbox;
    /** To set to TRUE so that west_lon_degree, south_lat_degree,
     * east_lon_degree and north_lat_degree fields are taken into account. */
    int bbox_valid;
    /** Western-most longitude of the area of use, in degrees. */
    double west_lon_degree;
    /** Southern-most latitude of the area of use, in degrees. */
    double south_lat_degree;
    /** Eastern-most longitude of the area of use, in degrees. */
    double east_lon_degree;
    /** Northern-most latitude of the area of use, in degrees. */
    double north_lat_degree;

    /** Whether deprecated objects are allowed. Default to FALSE. */
    int allow_deprecated;

    /** Celestial body of the CRS (e.g. "Earth"). The default value, NULL,
     *  means no restriction
     * @since 8.1
     */
    const char *celestial_body_name;
} PROJ_CRS_LIST_PARAMETERS;

/** \brief Structure given description of a unit.
 *
 * This structure may grow over time, and should not be directly allocated by
 * client code.
 * @since 7.1
 */
typedef struct {
    /** Authority name. */
    char *auth_name;

    /** Object code. */
    char *code;

    /** Object name. For example "metre", "US survey foot", etc. */
    char *name;

    /** Category of the unit: one of "linear", "linear_per_time", "angular",
     * "angular_per_time", "scale", "scale_per_time" or "time" */
    char *category;

    /** Conversion factor to apply to transform from that unit to the
     * corresponding SI unit (metre for "linear", radian for "angular", etc.).
     * It might be 0 in some cases to indicate no known conversion factor. */
    double conv_factor;

    /** PROJ short name, like "m", "ft", "us-ft", etc... Might be NULL */
    char *proj_short_name;

    /** Whether the object is deprecated */
    int deprecated;
} PROJ_UNIT_INFO;

/** \brief Structure given description of a celestial body.
 *
 * This structure may grow over time, and should not be directly allocated by
 * client code.
 * @since 8.1
 */
typedef struct {
    /** Authority name. */
    char *auth_name;

    /** Object name. For example "Earth" */
    char *name;

} PROJ_CELESTIAL_BODY_INFO;

/**@}*/

/**
 * \defgroup iso19111_functions Binding in C of basic methods from the C++ API
 *  Functions for ISO19111 C API
 *
 * The PJ* objects returned by proj_create_from_wkt(),
 * proj_create_from_database() and other functions in that section
 * will have generally minimal interaction with the functions declared in the
 * upper section of this header file (calling those functions on those objects
 * will either return an error or default/nonsensical values). The exception is
 * for ISO19111 objects of type CoordinateOperation that can be exported as a
 * valid PROJ pipeline. In this case, the PJ objects will work for example with
 * proj_trans_generic().
 * Conversely, objects returned by proj_create() and proj_create_argv(), which
 * are not of type CRS, will return an error when used with functions of this
 * section.
 * @{
 */

/*! @cond Doxygen_Suppress */
typedef struct PJ_OBJ_LIST PJ_OBJ_LIST;
/*! @endcond */

void PROJ_DLL proj_string_list_destroy(PROJ_STRING_LIST list);

void PROJ_DLL proj_context_set_autoclose_database(PJ_CONTEXT *ctx,
                                                  int autoclose);

int PROJ_DLL proj_context_set_database_path(PJ_CONTEXT *ctx, const char *dbPath,
                                            const char *const *auxDbPaths,
                                            const char *const *options);

const char PROJ_DLL *proj_context_get_database_path(PJ_CONTEXT *ctx);

const char PROJ_DLL *proj_context_get_database_metadata(PJ_CONTEXT *ctx,
                                                        const char *key);

PROJ_STRING_LIST PROJ_DLL proj_context_get_database_structure(
    PJ_CONTEXT *ctx, const char *const *options);

PJ_GUESSED_WKT_DIALECT PROJ_DLL proj_context_guess_wkt_dialect(PJ_CONTEXT *ctx,
                                                               const char *wkt);

PJ PROJ_DLL *proj_create_from_wkt(PJ_CONTEXT *ctx, const char *wkt,
                                  const char *const *options,
                                  PROJ_STRING_LIST *out_warnings,
                                  PROJ_STRING_LIST *out_grammar_errors);

PJ PROJ_DLL *proj_create_from_database(PJ_CONTEXT *ctx, const char *auth_name,
                                       const char *code, PJ_CATEGORY category,
                                       int usePROJAlternativeGridNames,
                                       const char *const *options);

int PROJ_DLL proj_uom_get_info_from_database(
    PJ_CONTEXT *ctx, const char *auth_name, const char *code,
    const char **out_name, double *out_conv_factor, const char **out_category);

int PROJ_DLL proj_grid_get_info_from_database(
    PJ_CONTEXT *ctx, const char *grid_name, const char **out_full_name,
    const char **out_package_name, const char **out_url,
    int *out_direct_download, int *out_open_license, int *out_available);

PJ PROJ_DLL *proj_clone(PJ_CONTEXT *ctx, const PJ *obj);

PJ_OBJ_LIST PROJ_DLL *
proj_create_from_name(PJ_CONTEXT *ctx, const char *auth_name,
                      const char *searchedName, const PJ_TYPE *types,
                      size_t typesCount, int approximateMatch,
                      size_t limitResultCount, const char *const *options);

PJ_TYPE PROJ_DLL proj_get_type(const PJ *obj);

int PROJ_DLL proj_is_deprecated(const PJ *obj);

PJ_OBJ_LIST PROJ_DLL *proj_get_non_deprecated(PJ_CONTEXT *ctx, const PJ *obj);

int PROJ_DLL proj_is_equivalent_to(const PJ *obj, const PJ *other,
                                   PJ_COMPARISON_CRITERION criterion);

int PROJ_DLL proj_is_equivalent_to_with_ctx(PJ_CONTEXT *ctx, const PJ *obj,
                                            const PJ *other,
                                            PJ_COMPARISON_CRITERION criterion);

int PROJ_DLL proj_is_crs(const PJ *obj);

const char PROJ_DLL *proj_get_name(const PJ *obj);

const char PROJ_DLL *proj_get_id_auth_name(const PJ *obj, int index);

const char PROJ_DLL *proj_get_id_code(const PJ *obj, int index);

const char PROJ_DLL *proj_get_remarks(const PJ *obj);

int PROJ_DLL proj_get_domain_count(const PJ *obj);

const char PROJ_DLL *proj_get_scope(const PJ *obj);

const char PROJ_DLL *proj_get_scope_ex(const PJ *obj, int domainIdx);

int PROJ_DLL proj_get_area_of_use(PJ_CONTEXT *ctx, const PJ *obj,
                                  double *out_west_lon_degree,
                                  double *out_south_lat_degree,
                                  double *out_east_lon_degree,
                                  double *out_north_lat_degree,
                                  const char **out_area_name);

int PROJ_DLL proj_get_area_of_use_ex(PJ_CONTEXT *ctx, const PJ *obj,
                                     int domainIdx, double *out_west_lon_degree,
                                     double *out_south_lat_degree,
                                     double *out_east_lon_degree,
                                     double *out_north_lat_degree,
                                     const char **out_area_name);

const char PROJ_DLL *proj_as_wkt(PJ_CONTEXT *ctx, const PJ *obj,
                                 PJ_WKT_TYPE type, const char *const *options);

const char PROJ_DLL *proj_as_proj_string(PJ_CONTEXT *ctx, const PJ *obj,
                                         PJ_PROJ_STRING_TYPE type,
                                         const char *const *options);

const char PROJ_DLL *proj_as_projjson(PJ_CONTEXT *ctx, const PJ *obj,
                                      const char *const *options);

PJ PROJ_DLL *proj_get_source_crs(PJ_CONTEXT *ctx, const PJ *obj);

PJ PROJ_DLL *proj_get_target_crs(PJ_CONTEXT *ctx, const PJ *obj);

PJ_OBJ_LIST PROJ_DLL *proj_identify(PJ_CONTEXT *ctx, const PJ *obj,
                                    const char *auth_name,
                                    const char *const *options,
                                    int **out_confidence);

PROJ_STRING_LIST PROJ_DLL proj_get_geoid_models_from_database(
    PJ_CONTEXT *ctx, const char *auth_name, const char *code,
    const char *const *options);

void PROJ_DLL proj_int_list_destroy(int *list);

/* ------------------------------------------------------------------------- */

PROJ_STRING_LIST PROJ_DLL proj_get_authorities_from_database(PJ_CONTEXT *ctx);

PROJ_STRING_LIST PROJ_DLL proj_get_codes_from_database(PJ_CONTEXT *ctx,
                                                       const char *auth_name,
                                                       PJ_TYPE type,
                                                       int allow_deprecated);

PROJ_CELESTIAL_BODY_INFO PROJ_DLL **proj_get_celestial_body_list_from_database(
    PJ_CONTEXT *ctx, const char *auth_name, int *out_result_count);

void PROJ_DLL proj_celestial_body_list_destroy(PROJ_CELESTIAL_BODY_INFO **list);

PROJ_CRS_LIST_PARAMETERS PROJ_DLL *proj_get_crs_list_parameters_create(void);

void PROJ_DLL
proj_get_crs_list_parameters_destroy(PROJ_CRS_LIST_PARAMETERS *params);

PROJ_CRS_INFO PROJ_DLL **
proj_get_crs_info_list_from_database(PJ_CONTEXT *ctx, const char *auth_name,
                                     const PROJ_CRS_LIST_PARAMETERS *params,
                                     int *out_result_count);

void PROJ_DLL proj_crs_info_list_destroy(PROJ_CRS_INFO **list);

PROJ_UNIT_INFO PROJ_DLL **proj_get_units_from_database(PJ_CONTEXT *ctx,
                                                       const char *auth_name,
                                                       const char *category,
                                                       int allow_deprecated,
                                                       int *out_result_count);

void PROJ_DLL proj_unit_list_destroy(PROJ_UNIT_INFO **list);

/* ------------------------------------------------------------------------- */
/*! @cond Doxygen_Suppress */
typedef struct PJ_INSERT_SESSION PJ_INSERT_SESSION;
/*! @endcond */

PJ_INSERT_SESSION PROJ_DLL *proj_insert_object_session_create(PJ_CONTEXT *ctx);

void PROJ_DLL proj_insert_object_session_destroy(PJ_CONTEXT *ctx,
                                                 PJ_INSERT_SESSION *session);

PROJ_STRING_LIST PROJ_DLL proj_get_insert_statements(
    PJ_CONTEXT *ctx, PJ_INSERT_SESSION *session, const PJ *object,
    const char *authority, const char *code, int numeric_codes,
    const char *const *allowed_authorities, const char *const *options);

char PROJ_DLL *proj_suggests_code_for(PJ_CONTEXT *ctx, const PJ *object,
                                      const char *authority, int numeric_code,
                                      const char *const *options);

void PROJ_DLL proj_string_destroy(char *str);

/* ------------------------------------------------------------------------- */
/*! @cond Doxygen_Suppress */
typedef struct PJ_OPERATION_FACTORY_CONTEXT PJ_OPERATION_FACTORY_CONTEXT;
/*! @endcond */

PJ_OPERATION_FACTORY_CONTEXT PROJ_DLL *
proj_create_operation_factory_context(PJ_CONTEXT *ctx, const char *authority);

void PROJ_DLL
proj_operation_factory_context_destroy(PJ_OPERATION_FACTORY_CONTEXT *ctx);

void PROJ_DLL proj_operation_factory_context_set_desired_accuracy(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    double accuracy);

void PROJ_DLL proj_operation_factory_context_set_area_of_interest(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    double west_lon_degree, double south_lat_degree, double east_lon_degree,
    double north_lat_degree);

void PROJ_DLL proj_operation_factory_context_set_area_of_interest_name(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    const char *area_name);

void PROJ_DLL proj_operation_factory_context_set_crs_extent_use(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    PROJ_CRS_EXTENT_USE use);

void PROJ_DLL proj_operation_factory_context_set_spatial_criterion(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    PROJ_SPATIAL_CRITERION criterion);

void PROJ_DLL proj_operation_factory_context_set_grid_availability_use(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    PROJ_GRID_AVAILABILITY_USE use);

void PROJ_DLL
proj_operation_factory_context_set_use_proj_alternative_grid_names(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    int usePROJNames);

void PROJ_DLL proj_operation_factory_context_set_allow_use_intermediate_crs(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    PROJ_INTERMEDIATE_CRS_USE use);

void PROJ_DLL proj_operation_factory_context_set_allowed_intermediate_crs(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx,
    const char *const *list_of_auth_name_codes);

void PROJ_DLL proj_operation_factory_context_set_discard_superseded(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx, int discard);

void PROJ_DLL proj_operation_factory_context_set_allow_ballpark_transformations(
    PJ_CONTEXT *ctx, PJ_OPERATION_FACTORY_CONTEXT *factory_ctx, int allow);

/* ------------------------------------------------------------------------- */

PJ_OBJ_LIST PROJ_DLL *
proj_create_operations(PJ_CONTEXT *ctx, const PJ *source_crs,
                       const PJ *target_crs,
                       const PJ_OPERATION_FACTORY_CONTEXT *operationContext);

int PROJ_DLL proj_list_get_count(const PJ_OBJ_LIST *result);

PJ PROJ_DLL *proj_list_get(PJ_CONTEXT *ctx, const PJ_OBJ_LIST *result,
                           int index);

void PROJ_DLL proj_list_destroy(PJ_OBJ_LIST *result);

int PROJ_DLL proj_get_suggested_operation(PJ_CONTEXT *ctx,
                                          PJ_OBJ_LIST *operations,
                                          PJ_DIRECTION direction,
                                          PJ_COORD coord);

/* ------------------------------------------------------------------------- */

int PROJ_DLL proj_crs_is_derived(PJ_CONTEXT *ctx, const PJ *crs);

PJ PROJ_DLL *proj_crs_get_geodetic_crs(PJ_CONTEXT *ctx, const PJ *crs);

PJ PROJ_DLL *proj_crs_get_horizontal_datum(PJ_CONTEXT *ctx, const PJ *crs);

PJ PROJ_DLL *proj_crs_get_sub_crs(PJ_CONTEXT *ctx, const PJ *crs, int index);

PJ PROJ_DLL *proj_crs_get_datum(PJ_CONTEXT *ctx, const PJ *crs);

PJ PROJ_DLL *proj_crs_get_datum_ensemble(PJ_CONTEXT *ctx, const PJ *crs);

PJ PROJ_DLL *proj_crs_get_datum_forced(PJ_CONTEXT *ctx, const PJ *crs);

int PROJ_DLL proj_crs_has_point_motion_operation(PJ_CONTEXT *ctx,
                                                 const PJ *crs);

int PROJ_DLL proj_datum_ensemble_get_member_count(PJ_CONTEXT *ctx,
                                                  const PJ *datum_ensemble);

double PROJ_DLL proj_datum_ensemble_get_accuracy(PJ_CONTEXT *ctx,
                                                 const PJ *datum_ensemble);

PJ PROJ_DLL *proj_datum_ensemble_get_member(PJ_CONTEXT *ctx,
                                            const PJ *datum_ensemble,
                                            int member_index);

double PROJ_DLL proj_dynamic_datum_get_frame_reference_epoch(PJ_CONTEXT *ctx,
                                                             const PJ *datum);

PJ PROJ_DLL *proj_crs_get_coordinate_system(PJ_CONTEXT *ctx, const PJ *crs);

PJ_COORDINATE_SYSTEM_TYPE PROJ_DLL proj_cs_get_type(PJ_CONTEXT *ctx,
                                                    const PJ *cs);

int PROJ_DLL proj_cs_get_axis_count(PJ_CONTEXT *ctx, const PJ *cs);

int PROJ_DLL proj_cs_get_axis_info(
    PJ_CONTEXT *ctx, const PJ *cs, int index, const char **out_name,
    const char **out_abbrev, const char **out_direction,
    double *out_unit_conv_factor, const char **out_unit_name,
    const char **out_unit_auth_name, const char **out_unit_code);

PJ PROJ_DLL *proj_get_ellipsoid(PJ_CONTEXT *ctx, const PJ *obj);

int PROJ_DLL proj_ellipsoid_get_parameters(PJ_CONTEXT *ctx, const PJ *ellipsoid,
                                           double *out_semi_major_metre,
                                           double *out_semi_minor_metre,
                                           int *out_is_semi_minor_computed,
                                           double *out_inv_flattening);

const char PROJ_DLL *proj_get_celestial_body_name(PJ_CONTEXT *ctx,
                                                  const PJ *obj);

PJ PROJ_DLL *proj_get_prime_meridian(PJ_CONTEXT *ctx, const PJ *obj);

int PROJ_DLL proj_prime_meridian_get_parameters(PJ_CONTEXT *ctx,
                                                const PJ *prime_meridian,
                                                double *out_longitude,
                                                double *out_unit_conv_factor,
                                                const char **out_unit_name);

PJ PROJ_DLL *proj_crs_get_coordoperation(PJ_CONTEXT *ctx, const PJ *crs);

int PROJ_DLL proj_coordoperation_get_method_info(
    PJ_CONTEXT *ctx, const PJ *coordoperation, const char **out_method_name,
    const char **out_method_auth_name, const char **out_method_code);

int PROJ_DLL proj_coordoperation_is_instantiable(PJ_CONTEXT *ctx,
                                                 const PJ *coordoperation);

int PROJ_DLL proj_coordoperation_has_ballpark_transformation(
    PJ_CONTEXT *ctx, const PJ *coordoperation);

int PROJ_DLL proj_coordoperation_requires_per_coordinate_input_time(
    PJ_CONTEXT *ctx, const PJ *coordoperation);

int PROJ_DLL proj_coordoperation_get_param_count(PJ_CONTEXT *ctx,
                                                 const PJ *coordoperation);

int PROJ_DLL proj_coordoperation_get_param_index(PJ_CONTEXT *ctx,
                                                 const PJ *coordoperation,
                                                 const char *name);

int PROJ_DLL proj_coordoperation_get_param(
    PJ_CONTEXT *ctx, const PJ *coordoperation, int index, const char **out_name,
    const char **out_auth_name, const char **out_code, double *out_value,
    const char **out_value_string, double *out_unit_conv_factor,
    const char **out_unit_name, const char **out_unit_auth_name,
    const char **out_unit_code, const char **out_unit_category);

int PROJ_DLL proj_coordoperation_get_grid_used_count(PJ_CONTEXT *ctx,
                                                     const PJ *coordoperation);

int PROJ_DLL proj_coordoperation_get_grid_used(
    PJ_CONTEXT *ctx, const PJ *coordoperation, int index,
    const char **out_short_name, const char **out_full_name,
    const char **out_package_name, const char **out_url,
    int *out_direct_download, int *out_open_license, int *out_available);

double PROJ_DLL proj_coordoperation_get_accuracy(PJ_CONTEXT *ctx,
                                                 const PJ *obj);

int PROJ_DLL proj_coordoperation_get_towgs84_values(
    PJ_CONTEXT *ctx, const PJ *coordoperation, double *out_values,
    int value_count, int emit_error_if_incompatible);

PJ PROJ_DLL *proj_coordoperation_create_inverse(PJ_CONTEXT *ctx, const PJ *obj);

int PROJ_DLL proj_concatoperation_get_step_count(PJ_CONTEXT *ctx,
                                                 const PJ *concatoperation);

PJ PROJ_DLL *proj_concatoperation_get_step(PJ_CONTEXT *ctx,
                                           const PJ *concatoperation,
                                           int i_step);

PJ PROJ_DLL *proj_coordinate_metadata_create(PJ_CONTEXT *ctx, const PJ *crs,
                                             double epoch);

double PROJ_DLL proj_coordinate_metadata_get_epoch(PJ_CONTEXT *ctx,
                                                   const PJ *obj);

/**@}*/

/* ------------------------------------------------------------------------- */
/* Binding in C of advanced methods from the C++ API                         */
/*                                                                           */
/* Manual construction of CRS objects.                                       */
/* ------------------------------------------------------------------------- */

/**
 * \defgroup iso19111_advanced_types C types for advanced methods from the C++
 * API
 * @{
 */

/** Type of unit of measure. */
typedef enum {
    /** Angular unit of measure */
    PJ_UT_ANGULAR,
    /** Linear unit of measure */
    PJ_UT_LINEAR,
    /** Scale unit of measure */
    PJ_UT_SCALE,
    /** Time unit of measure */
    PJ_UT_TIME,
    /** Parametric unit of measure */
    PJ_UT_PARAMETRIC
} PJ_UNIT_TYPE;

/** \brief Axis description.
 */
typedef struct {
    /** Axis name. */
    char *name;

    /** Axis abbreviation. */
    char *abbreviation;

    /** Axis direction. */
    char *direction;

    /** Axis unit name. */
    char *unit_name;

    /** Conversion factor to SI of the unit. */
    double unit_conv_factor;

    /** Type of unit */
    PJ_UNIT_TYPE unit_type;
} PJ_AXIS_DESCRIPTION;

/** Type of Cartesian 2D coordinate system. */
typedef enum {
    /** Easting-Norting */
    PJ_CART2D_EASTING_NORTHING,
    /** Northing-Easting */
    PJ_CART2D_NORTHING_EASTING,
    /** North Pole Easting/SOUTH-Norting/SOUTH */
    PJ_CART2D_NORTH_POLE_EASTING_SOUTH_NORTHING_SOUTH,
    /** South Pole Easting/NORTH-Norting/NORTH */
    PJ_CART2D_SOUTH_POLE_EASTING_NORTH_NORTHING_NORTH,
    /** Westing-southing */
    PJ_CART2D_WESTING_SOUTHING,
} PJ_CARTESIAN_CS_2D_TYPE;

/** Type of Ellipsoidal 2D coordinate system. */
typedef enum {
    /** Longitude-Latitude */
    PJ_ELLPS2D_LONGITUDE_LATITUDE,
    /** Latitude-Longitude */
    PJ_ELLPS2D_LATITUDE_LONGITUDE,
} PJ_ELLIPSOIDAL_CS_2D_TYPE;

/** Type of Ellipsoidal 3D coordinate system. */
typedef enum {
    /** Longitude-Latitude-Height(up) */
    PJ_ELLPS3D_LONGITUDE_LATITUDE_HEIGHT,
    /** Latitude-Longitude-Height(up) */
    PJ_ELLPS3D_LATITUDE_LONGITUDE_HEIGHT,
} PJ_ELLIPSOIDAL_CS_3D_TYPE;

/** \brief Description of a parameter value for a Conversion.
 */
typedef struct {
    /** Parameter name. */
    const char *name;

    /** Parameter authority name. */
    const char *auth_name;

    /** Parameter code. */
    const char *code;

    /** Parameter value. */
    double value;

    /** Name of unit in which parameter value is expressed. */
    const char *unit_name;

    /** Conversion factor to SI of the unit. */
    double unit_conv_factor;

    /** Type of unit */
    PJ_UNIT_TYPE unit_type;
} PJ_PARAM_DESCRIPTION;

/**@}*/

/**
 * \defgroup iso19111_advanced_functions Binding in C of advanced methods from
 * the C++ API
 * @{
 */

PJ PROJ_DLL *proj_create_cs(PJ_CONTEXT *ctx, PJ_COORDINATE_SYSTEM_TYPE type,
                            int axis_count, const PJ_AXIS_DESCRIPTION *axis);

PJ PROJ_DLL *proj_create_cartesian_2D_cs(PJ_CONTEXT *ctx,
                                         PJ_CARTESIAN_CS_2D_TYPE type,
                                         const char *unit_name,
                                         double unit_conv_factor);

PJ PROJ_DLL *proj_create_ellipsoidal_2D_cs(PJ_CONTEXT *ctx,
                                           PJ_ELLIPSOIDAL_CS_2D_TYPE type,
                                           const char *unit_name,
                                           double unit_conv_factor);

PJ PROJ_DLL *
proj_create_ellipsoidal_3D_cs(PJ_CONTEXT *ctx, PJ_ELLIPSOIDAL_CS_3D_TYPE type,
                              const char *horizontal_angular_unit_name,
                              double horizontal_angular_unit_conv_factor,
                              const char *vertical_linear_unit_name,
                              double vertical_linear_unit_conv_factor);

PJ_OBJ_LIST PROJ_DLL *proj_query_geodetic_crs_from_datum(
    PJ_CONTEXT *ctx, const char *crs_auth_name, const char *datum_auth_name,
    const char *datum_code, const char *crs_type);

PJ PROJ_DLL *proj_create_geographic_crs(
    PJ_CONTEXT *ctx, const char *crs_name, const char *datum_name,
    const char *ellps_name, double semi_major_metre, double inv_flattening,
    const char *prime_meridian_name, double prime_meridian_offset,
    const char *pm_angular_units, double pm_units_conv,
    const PJ *ellipsoidal_cs);

PJ PROJ_DLL *
proj_create_geographic_crs_from_datum(PJ_CONTEXT *ctx, const char *crs_name,
                                      const PJ *datum_or_datum_ensemble,
                                      const PJ *ellipsoidal_cs);

PJ PROJ_DLL *proj_create_geocentric_crs(
    PJ_CONTEXT *ctx, const char *crs_name, const char *datum_name,
    const char *ellps_name, double semi_major_metre, double inv_flattening,
    const char *prime_meridian_name, double prime_meridian_offset,
    const char *angular_units, double angular_units_conv,
    const char *linear_units, double linear_units_conv);

PJ PROJ_DLL *proj_create_geocentric_crs_from_datum(
    PJ_CONTEXT *ctx, const char *crs_name, const PJ *datum_or_datum_ensemble,
    const char *linear_units, double linear_units_conv);

PJ PROJ_DLL *proj_create_derived_geographic_crs(PJ_CONTEXT *ctx,
                                                const char *crs_name,
                                                const PJ *base_geographic_crs,
                                                const PJ *conversion,
                                                const PJ *ellipsoidal_cs);

int PROJ_DLL proj_is_derived_crs(PJ_CONTEXT *ctx, const PJ *crs);

PJ PROJ_DLL *proj_alter_name(PJ_CONTEXT *ctx, const PJ *obj, const char *name);

PJ PROJ_DLL *proj_alter_id(PJ_CONTEXT *ctx, const PJ *obj,
                           const char *auth_name, const char *code);

PJ PROJ_DLL *proj_crs_alter_geodetic_crs(PJ_CONTEXT *ctx, const PJ *obj,
                                         const PJ *new_geod_crs);

PJ PROJ_DLL *proj_crs_alter_cs_angular_unit(PJ_CONTEXT *ctx, const PJ *obj,
                                            const char *angular_units,
                                            double angular_units_conv,
                                            const char *unit_auth_name,
                                            const char *unit_code);

PJ PROJ_DLL *proj_crs_alter_cs_linear_unit(PJ_CONTEXT *ctx, const PJ *obj,
                                           const char *linear_units,
                                           double linear_units_conv,
                                           const char *unit_auth_name,
                                           const char *unit_code);

PJ PROJ_DLL *proj_crs_alter_parameters_linear_unit(
    PJ_CONTEXT *ctx, const PJ *obj, const char *linear_units,
    double linear_units_conv, const char *unit_auth_name, const char *unit_code,
    int convert_to_new_unit);

PJ PROJ_DLL *proj_crs_promote_to_3D(PJ_CONTEXT *ctx, const char *crs_3D_name,
                                    const PJ *crs_2D);

PJ PROJ_DLL *
proj_crs_create_projected_3D_crs_from_2D(PJ_CONTEXT *ctx, const char *crs_name,
                                         const PJ *projected_2D_crs,
                                         const PJ *geog_3D_crs);

PJ PROJ_DLL *proj_crs_demote_to_2D(PJ_CONTEXT *ctx, const char *crs_2D_name,
                                   const PJ *crs_3D);

PJ PROJ_DLL *proj_create_engineering_crs(PJ_CONTEXT *ctx, const char *crsName);

PJ PROJ_DLL *proj_create_vertical_crs(PJ_CONTEXT *ctx, const char *crs_name,
                                      const char *datum_name,
                                      const char *linear_units,
                                      double linear_units_conv);

PJ PROJ_DLL *proj_create_vertical_crs_ex(
    PJ_CONTEXT *ctx, const char *crs_name, const char *datum_name,
    const char *datum_auth_name, const char *datum_code,
    const char *linear_units, double linear_units_conv,
    const char *geoid_model_name, const char *geoid_model_auth_name,
    const char *geoid_model_code, const PJ *geoid_geog_crs,
    const char *const *options);

PJ PROJ_DLL *proj_create_compound_crs(PJ_CONTEXT *ctx, const char *crs_name,
                                      const PJ *horiz_crs, const PJ *vert_crs);

PJ PROJ_DLL *proj_create_conversion(PJ_CONTEXT *ctx, const char *name,
                                    const char *auth_name, const char *code,
                                    const char *method_name,
                                    const char *method_auth_name,
                                    const char *method_code, int param_count,
                                    const PJ_PARAM_DESCRIPTION *params);

PJ PROJ_DLL *proj_create_conversion(PJ_CONTEXT *ctx, const char *name,
                                    const char *auth_name, const char *code,
                                    const char *method_name,
                                    const char *method_auth_name,
                                    const char *method_code, int param_count,
                                    const PJ_PARAM_DESCRIPTION *params);

/* clang-format off */
PJ PROJ_DLL *proj_create_linear_affine_parametric_conversion(
    PJ_CONTEXT *ctx, const char* name,
    double A0, const char *A0_unit_name, double A0_unit_conv_factor,
    double A1, const char *A1_unit_name, double A1_unit_conv_factor,
    double A2, const char *A2_unit_name, double A2_unit_conv_factor,
    double B0, const char *B0_unit_name, double B0_unit_conv_factor,
    double B1, const char *B1_unit_name, double B1_unit_conv_factor,
    double B2, const char *B2_unit_name, double B2_unit_conv_factor);
/* clang-format on */

PJ PROJ_DLL *proj_create_transformation(
    PJ_CONTEXT *ctx, const char *name, const char *auth_name, const char *code,
    const PJ *source_crs, const PJ *target_crs, const PJ *interpolation_crs,
    const char *method_name, const char *method_auth_name,
    const char *method_code, int param_count,
    const PJ_PARAM_DESCRIPTION *params, double accuracy);

PJ PROJ_DLL *
proj_convert_conversion_to_other_method(PJ_CONTEXT *ctx, const PJ *conversion,
                                        int new_method_epsg_code,
                                        const char *new_method_name);

PJ PROJ_DLL *proj_create_projected_crs(PJ_CONTEXT *ctx, const char *crs_name,
                                       const PJ *geodetic_crs,
                                       const PJ *conversion,
                                       const PJ *coordinate_system);

PJ PROJ_DLL *proj_create_derived_projected_crs(PJ_CONTEXT *ctx,
                                               const char *crs_name,
                                               const PJ *base_proj_crs,
                                               const PJ *deriving_conversion,
                                               const PJ *coordinate_system);

PJ PROJ_DLL *proj_crs_add_horizontal_derived_conversion(
    PJ_CONTEXT *ctx, const char *crs_name, const PJ *base_crs,
    const PJ *deriving_conversion, const PJ *coordinate_system);

PJ PROJ_DLL *proj_crs_create_bound_crs(PJ_CONTEXT *ctx, const PJ *base_crs,
                                       const PJ *hub_crs,
                                       const PJ *transformation);

PJ PROJ_DLL *proj_crs_create_bound_crs_to_WGS84(PJ_CONTEXT *ctx, const PJ *crs,
                                                const char *const *options);

PJ PROJ_DLL *proj_crs_create_bound_vertical_crs(PJ_CONTEXT *ctx,
                                                const PJ *vert_crs,
                                                const PJ *hub_geographic_3D_crs,
                                                const char *grid_name);

/* BEGIN: Generated by scripts/create_c_api_projections.py*/
PJ PROJ_DLL *proj_create_conversion_utm(PJ_CONTEXT *ctx, int zone, int north);

PJ PROJ_DLL *proj_create_conversion_transverse_mercator(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_gauss_schreiber_transverse_mercator(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_transverse_mercator_south_oriented(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_two_point_equidistant(
    PJ_CONTEXT *ctx, double latitude_first_point, double longitude_first_point,
    double latitude_second_point, double longitude_second_point,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_tunisia_mapping_grid(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_tunisia_mining_grid(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_albers_equal_area(
    PJ_CONTEXT *ctx, double latitude_false_origin,
    double longitude_false_origin, double latitude_first_parallel,
    double latitude_second_parallel, double easting_false_origin,
    double northing_false_origin, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_lambert_conic_conformal_1sp(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_lambert_conic_conformal_1sp_variant_b(
    PJ_CONTEXT *ctx, double latitude_nat_origin, double scale,
    double latitude_false_origin, double longitude_false_origin,
    double easting_false_origin, double northing_false_origin,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_lambert_conic_conformal_2sp(
    PJ_CONTEXT *ctx, double latitude_false_origin,
    double longitude_false_origin, double latitude_first_parallel,
    double latitude_second_parallel, double easting_false_origin,
    double northing_false_origin, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_lambert_conic_conformal_2sp_michigan(
    PJ_CONTEXT *ctx, double latitude_false_origin,
    double longitude_false_origin, double latitude_first_parallel,
    double latitude_second_parallel, double easting_false_origin,
    double northing_false_origin, double ellipsoid_scaling_factor,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_lambert_conic_conformal_2sp_belgium(
    PJ_CONTEXT *ctx, double latitude_false_origin,
    double longitude_false_origin, double latitude_first_parallel,
    double latitude_second_parallel, double easting_false_origin,
    double northing_false_origin, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_azimuthal_equidistant(
    PJ_CONTEXT *ctx, double latitude_nat_origin, double longitude_nat_origin,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_guam_projection(
    PJ_CONTEXT *ctx, double latitude_nat_origin, double longitude_nat_origin,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_bonne(
    PJ_CONTEXT *ctx, double latitude_nat_origin, double longitude_nat_origin,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_lambert_cylindrical_equal_area_spherical(
    PJ_CONTEXT *ctx, double latitude_first_parallel,
    double longitude_nat_origin, double false_easting, double false_northing,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_lambert_cylindrical_equal_area(
    PJ_CONTEXT *ctx, double latitude_first_parallel,
    double longitude_nat_origin, double false_easting, double false_northing,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_cassini_soldner(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_equidistant_conic(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double latitude_first_parallel, double latitude_second_parallel,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_eckert_i(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_eckert_ii(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_eckert_iii(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_eckert_iv(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_eckert_v(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_eckert_vi(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_equidistant_cylindrical(
    PJ_CONTEXT *ctx, double latitude_first_parallel,
    double longitude_nat_origin, double false_easting, double false_northing,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_equidistant_cylindrical_spherical(
    PJ_CONTEXT *ctx, double latitude_first_parallel,
    double longitude_nat_origin, double false_easting, double false_northing,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_gall(PJ_CONTEXT *ctx, double center_long,
                                         double false_easting,
                                         double false_northing,
                                         const char *ang_unit_name,
                                         double ang_unit_conv_factor,
                                         const char *linear_unit_name,
                                         double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_goode_homolosine(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_interrupted_goode_homolosine(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_geostationary_satellite_sweep_x(
    PJ_CONTEXT *ctx, double center_long, double height, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_geostationary_satellite_sweep_y(
    PJ_CONTEXT *ctx, double center_long, double height, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_gnomonic(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_hotine_oblique_mercator_variant_a(
    PJ_CONTEXT *ctx, double latitude_projection_centre,
    double longitude_projection_centre, double azimuth_initial_line,
    double angle_from_rectified_to_skrew_grid, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_hotine_oblique_mercator_variant_b(
    PJ_CONTEXT *ctx, double latitude_projection_centre,
    double longitude_projection_centre, double azimuth_initial_line,
    double angle_from_rectified_to_skrew_grid, double scale,
    double easting_projection_centre, double northing_projection_centre,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *
proj_create_conversion_hotine_oblique_mercator_two_point_natural_origin(
    PJ_CONTEXT *ctx, double latitude_projection_centre, double latitude_point1,
    double longitude_point1, double latitude_point2, double longitude_point2,
    double scale, double easting_projection_centre,
    double northing_projection_centre, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_laborde_oblique_mercator(
    PJ_CONTEXT *ctx, double latitude_projection_centre,
    double longitude_projection_centre, double azimuth_initial_line,
    double scale, double false_easting, double false_northing,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_international_map_world_polyconic(
    PJ_CONTEXT *ctx, double center_long, double latitude_first_parallel,
    double latitude_second_parallel, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_krovak_north_oriented(
    PJ_CONTEXT *ctx, double latitude_projection_centre,
    double longitude_of_origin, double colatitude_cone_axis,
    double latitude_pseudo_standard_parallel,
    double scale_factor_pseudo_standard_parallel, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_krovak(
    PJ_CONTEXT *ctx, double latitude_projection_centre,
    double longitude_of_origin, double colatitude_cone_axis,
    double latitude_pseudo_standard_parallel,
    double scale_factor_pseudo_standard_parallel, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_lambert_azimuthal_equal_area(
    PJ_CONTEXT *ctx, double latitude_nat_origin, double longitude_nat_origin,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_miller_cylindrical(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_mercator_variant_a(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_mercator_variant_b(
    PJ_CONTEXT *ctx, double latitude_first_parallel, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_popular_visualisation_pseudo_mercator(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_mollweide(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_new_zealand_mapping_grid(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_oblique_stereographic(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_orthographic(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_local_orthographic(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double azimuth,
    double scale, double false_easting, double false_northing,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_american_polyconic(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_polar_stereographic_variant_a(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_polar_stereographic_variant_b(
    PJ_CONTEXT *ctx, double latitude_standard_parallel,
    double longitude_of_origin, double false_easting, double false_northing,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_robinson(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_sinusoidal(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_stereographic(
    PJ_CONTEXT *ctx, double center_lat, double center_long, double scale,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_van_der_grinten(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_wagner_i(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_wagner_ii(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_wagner_iii(
    PJ_CONTEXT *ctx, double latitude_true_scale, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_wagner_iv(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_wagner_v(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_wagner_vi(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_wagner_vii(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_quadrilateralized_spherical_cube(
    PJ_CONTEXT *ctx, double center_lat, double center_long,
    double false_easting, double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_spherical_cross_track_height(
    PJ_CONTEXT *ctx, double peg_point_lat, double peg_point_long,
    double peg_point_heading, double peg_point_height,
    const char *ang_unit_name, double ang_unit_conv_factor,
    const char *linear_unit_name, double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_equal_earth(
    PJ_CONTEXT *ctx, double center_long, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_vertical_perspective(
    PJ_CONTEXT *ctx, double topo_origin_lat, double topo_origin_long,
    double topo_origin_height, double view_point_height, double false_easting,
    double false_northing, const char *ang_unit_name,
    double ang_unit_conv_factor, const char *linear_unit_name,
    double linear_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_pole_rotation_grib_convention(
    PJ_CONTEXT *ctx, double south_pole_lat_in_unrotated_crs,
    double south_pole_long_in_unrotated_crs, double axis_rotation,
    const char *ang_unit_name, double ang_unit_conv_factor);

PJ PROJ_DLL *proj_create_conversion_pole_rotation_netcdf_cf_convention(
    PJ_CONTEXT *ctx, double grid_north_pole_latitude,
    double grid_north_pole_longitude, double north_pole_grid_longitude,
    const char *ang_unit_name, double ang_unit_conv_factor);

/* END: Generated by scripts/create_c_api_projections.py*/

/**@}*/

#ifdef __cplusplus
}
#endif

#endif /* ndef PROJ_H */
