# Additional settings([Setup] Menu)

## tabs

- "General" Tab
- "Control Sequence" Tab
- "Copy and Paste" Tab
- "Cygwin" Tab
- "Font" Tab
- "coding" Tab
- "log" Tab
- "visual" Tab

## "General" Tab

Enable clickable URL
  Launches the web browser by clicking URL string.
Disable accelerator send break
  Disables accelerator key of send break.
Accept broadcast
  Accept the broadcast command.
  Can be only enabled when the "Realtime mode" is off. However, this option is always ignored when the "Realtime mode" is on.
Mouse wheel scroll line
  Configures the mouse wheel scroll line.
Auto scroll only in bottom line
  Stop auto scrolling except when the bottom line is displayed.
Clear display when window resized
  The current screen is cleared when the VT window resizes.
Change cursor shape with IME state
  When the IME is enabled, the caret is gray.
List hidden fonts in font dialog
  A feature that some fonts can be shown or not on the font list is added on Windows 7 or later. When this setting is enabled, whole fonts can be selected on the Font setting dialog.
Title format
  Configures the window title format.
  Display host/port name
    Displays hostname or serial port name
  Display session number
    Displays session number
  Display VT/TEK
    Displays VT or TEK
  Swap hostname and title position
    Swaps the hostname and title text, displays hostname first.
  Display tcp port number
    Displays tcp port number (TCP/IP connection only)
  Display serial port speed
    Displays speed of serial port (serial connection only)

## "Control Sequence" Tab

Accept mouse event tracking
  Tera Term would send the escape sequence of the mouse operation when VT window is changed to the mouse tracking mode by the host application.
  However, TERM environment variable should be "xterm" type.
Disable mouse event tracking when Control is pressed
  The mouse tracking mode is enabled, TeraTerm does not send the mouse operation while the control key is pressed.
Accept window title change request
  Configures whether a user accepts the window title changing.
  off
    Do not accept it.
  overwrite
    Accept it, and then display only the window tile.
  ahead
    Accept it, and then insert the window title before the canonical title.
  last
    Accept it, and then insert the window title after the canonical title.
Window title report
  A user can configure how Tera Term can respond to the dtterm window title and icon label reporting request.
  ignore
    Ignore a window title reporting request.
  accept
    Tera Term reports the current window title. However, be careful about using this feature because the security problem will occur.
  empty
    Report empty string.
Window control sequence
  added support for the position moving, the minimization, the maximization, the most front, the most back, the refresh and the window size changing(per pixel and character) control sequences regarding the dtterm window operation.
Window report sequence
  This function enables the dtterm control sequence such as the window status reporting, the window position reporting, the window size(in pixel and character) reporting and the root window size reporting, among the window information reporting features.
  If you do not want window information to be sent to remote host by some reason such as security, please disable this setting.
Cursor control sequence
  Enables the control sequence for the cursor shape.
  This function enables cursor shape change by cursor change sequence of DECSCUSR(cursor shape change), WYSTCURM(Wyse no-blinking cursor), WYULCURM(Wyse underlined cursor) and AT&T 610 blinking cursor.

  If a user uses the vim editor, write below entries in the ~/.vimrc to enable this feature.

      set t_SI=^[[3\ q
      set t_EI=^[[1\ q
      NOTE: Input ^[ by using Control-V Control-[.

  If the cursor periodically blinks after an application exits, a user should configure as follows.
  In the ncurses 5.7 terminfo, the invisible(civis)/normal display(cnorm)/highlighting(cvvis) of the xterm cursor are as follows:

      civis=\E[?25l
      cnorm=\E[?12l\E[?25h
      cvvis=\E[?12;25h

  When the upper configuration is enabled, the normal cursor displays with the non-blinking mode and the emphasis cursor displays with the blinking mode. So, the cursor does not blink when the terminfo application displays the own cursor.
  If a user want to blink the cursor, turn off the CursorCtrlSequence entry or do in the following commands:

      % infocmp xterm > xterm.ti
      Open the xterm.ti file, change from a value of cnorm and cvvis to \E?25h.
      % tic -o ~/.terminfo xterm.ti
      Execute the tic command.
      # tic xterm.ti
      If the configuration is enabled as whole system, execute the upper command with a root user.

Clipboard access from remote
  permits the host to access the clipboard.
  off
    can not permit
  write only
    can permit a clipboard to write
  read only
    can permit a clipboard to read
  read/write
    can permit a clipboard to write and read
Notify clipboard access from remote
  Notifies the access of clipboard from remote host.
Accept clearing scroll buffer from remote
  Enables the control sequence for clearing the scroll buffer. When enabled, the clear command clears the scroll buffer.

## "Copy and Paste" Tab

Enable continued line copy
  Concatenates current line with the next line including word characters when the whole line is stepped over.
Disable mouse R button paste
  Disables pasting clipboard data when mouse right button is clicked.
Confirm mouse R button paste
  Displays popup menu and confirm pasting clipboard data when mouse right button is clicked.
Select only by L button
  Enable selection by mouse drag only with left button.
Trim trailing new line character when pasting
  Remove trailing new line character when pasting.
Normalize line break when pasting
  Normalize new line on pasting. When new line of clipboard is CR and LF, every new line is changed to CR+LF.
Confirm change paste
  When the Clipboard includes CR/LF, the confirmation dialog can be shown to paste by right-click or Alt+V. This is a foolproof way.
String file
  When the Clipboard includes any strings in the specified file, the confirmation dialog can be shown to paste by right-click or Alt+V. This is a foolproof way.
  This function works when the ConfirmChangePaste is enabled.
Delimiter characters
  Includes delimiter characters for the word selection.
Paste delay per line
  A user can delay to send a line data to the remote host when the user pastes multiple lines. The delay time can be specified by this option on the millisecond time scale.
Disabling text selection when the window is activated
  When an inactive window is activated by clicking the text area with the mouse, the text selection is disabled.

## "Cygwin" tab

Cygwin install path
  Specify the install directory of Cygwin.
CygTerm
  Configure CygTerm settings. Please refer to CygTerm+ setup file for details.

  NOTE: The cygterm.cfg file is automatically updated after configuration on version 4.88 or earlier, however the file is not automatically updated on version 4.89 or later.
  Please do Setup - Save Setup to update the cygterm.cfg file.